Abstract:[Objective]A novel assay of electrochemical aptasensor for quantitative detection of Salmonella typhimurium with better practicability was constructed and investigated in order to overcome the shortcomings of traditional Salmonella detection methods,such as time-saving,sensitivity,simplicity,and etc.[Method]The prepared graphene oxide (GO) solution was dropped onto the glassy carbon electrode (GCE) surface and was reduced in PBS buffer by electrochemical reduction method to obtain reduced graphene oxide (rGO),and then Au nanoparticles (AuNPs) were electrochemically deposited onto the electrode by submersion in HAuCl4.The complementary strands of the aptamers of Salmonella typhimurium (S) were attached to the surface of rGO/AuNPs GCE by Au-S bond,and then the electrode surface was blocked with MCH.Subsequently,the aptamers of Salmonella typhimurium (Apt) were dripped onto the modified electrode to make Apt bind with S.The modified electrode was immersed into the mixture containing Salmonella typhimurium and exonuclease Ⅰ (Exo Ⅰ) at 37 ℃C.In terms of the characteristics of Exo Ⅰ that could amplify electrical signals and the aptamers that could exclusively bind with Salmonella typhimurium,the aptamers were taken away from S circularly.Then,the modified electrode was immersed in methylene blue (MB) solution for a while.Finally,the conditions of the incubation time in bacteria liquid,the Exo Ⅰ concentration were optimized and the electrical signals of the electrode surface was monitored to construct the aptasensor.This electrochemical aptasensor was used to test Escherichia coli,Staphylococcus aureus,Shigella,Listeria monocytogenes and Vibrio parahaemolyticus to ensure the electrochemical aptasensor's specificity.The electrochemical aptasensor was used to detect 2×102-2×107 cfu/mL Salmonella typhimurium to ensure the electrochemical aptasensor's sensitivity.Then this electrochemical aptasensor was used to detect the pork to evaluate the practical use of electrochemical aptasensor.[Result]The optimization of the electrochemical aptasensor incubation time in bacterial liquid and the Exo Ⅰ concentration were studied in detail,and the optimal conditions were 40 min and 0.8 U·μL-1.The developed aptasensor was specific to Salmonella typhimurium and doesn't react with non-target bacteria.The electrochemical aptasensor can successfully detect the Salmonella typhimurium target down to 67 cfu/mL.A good recovery of Salmonella typhimurium in the range of 97.3％-106.7％ was obtained in pork by electrochemical aptasensor assays developed.[Conclusion]This electrochemical aptasensor can detect Salmonella typhimurium with a high sensitivity,a high specificity,an easy operation,a rapid detection and a low cost,which provide a good application prospect in the field of rapid quantitative detection of Salmonella typhimurium.

An Electrochemical Aptasensor for Detection of Samonella typhimurium with Methylene Blue as Hybridization Indicator

A Sandwich-type Electrochemical Immunosensor for the Sensitive Determination of Salmonella Typhimurium in Food

A robust and facile colorimetric aptasensor for the detection of Salmonella Typhimurium based on the regulation of Fe3O4@Cu@PCPy yolk-shell nanozyme activity

An Aptamer-Based Electrochemical Biosensor for the Detection of Salmonella.

Impedimetric Salmonella Aptasensor Using a Glassy Carbon Electrode Modified with an Electrodeposited Composite Consisting of Reduced Graphene Oxide and Carbon Nanotubes

A Chemiluminescent Aptasensor Based on Rolling Circle Amplification and Co2+/N-(aminobutyl)-N-(ethylisoluminol) Functional Flowerlike Gold Nanoparticles for Salmonella Typhimurium Detection

Aptamer-AuNP-conjugated carboxymethyl chitosan–functionalized graphene oxide for colorimetric identification of Salmonella typhimurium

Colorimetric Aptasensor for the Detection of Salmonella Enterica Serovar Typhimurium Using ZnFe2O4-reduced Graphene Oxide Nanostructures As an Effective Peroxidase Mimetics.

A microfluidic biosensor for rapid detection of Salmonella typhimurium based on magnetic separation, enzymatic catalysis and electrochemical impedance analysis

SERS Aptasensor for Salmonella Typhimurium Detection Based on Spiny Gold Nanoparticles

A highly sensitive and specific Gold Electrode-Based electrochemical immunosensor for rapid On-Site detection of Salmonella enterica

Impact of fixation/drying conditions on fixation rate, teachability and bioefficacy in CCA-C treated red pine and southern pine

Salmonella Typhimurium Detection Using a Surface-Enhanced Raman Scattering-Based Aptasensor

Aptamer-mediated double strand displacement amplification with microchip electrophoresis for ultrasensitive detection of Salmonella typhimurium

A Novel Fluorescence Aptasensor Based on Magnetic Beads/Gold Nanoparticles/DNA-Stabilized Silver Nanoclusters for Detection of Salmonella Typhimurium

A Specific and Sensitive Aptamer-Based Digital PCR Chip for <i>Salmonella typhimurium</i> Detection

Rapid and Sensitive Strategy for Salmonella Detection Using an InvA Gene-Based Electrochemical DNA Sensor

SERS Aptasensor Detection of Salmonella Typhimurium Using a Magnetic Gold Nanoparticle and Gold Nanoparticle Based Sandwich Structure

An antifouling electrochemical biosensor using self-signal for Salmonella typhimurium direct detection in food sample

Silver/copper bimetallic nanoclusters integrating with cryonase-assisted target recycling amplification detection of Salmonella typhimurium

A dual-mode composite nanozyme-based cascade colorimetric-fluorescence aptasensor for Salmonella Typhimurium detection