Abstract:Resident combustion of solid fuel has been widely acknowledged as a high potential for pollutant reduction. However, there is a marked asymmetry between more pollutant emission and less burned volatiles of biomass and coal in the combustion process. To study the solid fuel optimum combustion form in a household stove, both the pollution reduction and energy efficient utilization of crop straws and coals were investigated. Taking the molding pressure and clay addition ratio as variable process conditions, the research of bio-coal briquette (made from the mixture of anthracite and biomass) was implemented in the range of 15~35 MP and 5~15%, respectively. Biomass and coal work complementarily for each other’s combustion property development. In particular, the pyrolysis gas produced by biomass low-temperature devolatilization is featured with low ignition point and is distributed in the bio-coal briquette. Its own combustion provides energy for anthracite particle combustion. Consequently, a positive effect was identified when bio-coal briquettes were used as residential fuel, and further improvement manifested in reducing more than 90% of particle matter (PM) and achieving about twice the thermal efficiencies (TEs) compared with the mass-weighted average values of coal briquettes and biomass briquettes. 88.8 ± 11.8%, 136.7 ± 13.7% and 81.4 ± 17.7% more TEs were provided by wheat straw–coal briquettes, rice straw–coal briquettes and maize straw–coal briquettes. 93.3 ± 3.1% (wheat straw–coal), 97.6 ± 0.2% (rice straw–coal) and 90.4 ± 2.2% (maize straw–coal) in terms of PM2.5 emission factors (EFs) was reduced. For bio-coal briquette, a 25 MPa and 10% addition were determined as the optimum molding pressure and clay addition ratio. Bio-coal briquettes with higher TEs and lower PM EFs will bring about substantial benefits for air quality promotion, human health and energy saving.

Study on Biomass Energy Alternative Bulkcuringbarn Heating Coal Stove System

Research on the key technologies of a biomass briquette-fueled curing barn heating system

Experimental Study on Pyrolysis and Combustion Properties of Biomass Briquette.

Application Effect of Air Heat-Coal Mixed Energy Barn in Tobacco Flue-curing

Research on Application of Biomass Energy in Normal Bulk Curing Barns

The Application of Biomass Fuel Substituting Coal in Tobacco Curing

Evaluation of Biomass Briquettes from Agricultural Waste on Industrial Application of Flue-Curing of Tobacco

Application Research Progress of Biomass Energy in Tobacco Curing

Study on Curing Effect and the Waste Heat Recovering Equipment Design of Flue Gas of Bulk Curing Barn

Effects of Tobacco Harvesting Roast Integration Barn Basket Baking

A comparative experiment on the curing effect of different heating energy sources of bulk tobacco-curing barn

Experimental Investigation on Mixed Combustion Characteristics of Coal, Tobacco Straw, and Cinder in an Energy-Saving Bake Process

Comparative survey on central heating process for curing barns

Design of biomass briquette stove for cooling and cooking

Research on energy saving and emission reduction for rural tobacco curing

Analysis on Energy Conservation Effect of Tobacco Bulk Curing Barn Retrofitted Waste-heat Collector

Comparative Study on Tobacco Leaf Curing Cost and Quality of Air Source heat Pump Cured Room and Traditional Bulk Curing Barn

Research on the Technology Optimization and Application of Loose-leaf Baking in Bulk Curing Barn in Weifang

Influence of Molding Technology on Thermal Efficiencies and Pollutant Emissions from Household Solid Fuel Combustion during Cooking Activities in Chinese Rural Areas

An analysis of China's biomass briquette fuel large‐scale steam heating system

The design and study of a composite box-type heat exchanger used in biomass stoves