Abstract:In this paper, a new type of six-degrees of freedom (DOF) flexible parallel mechanism (FPM) is presented. This type of parallel mechanism possesses several favorable properties: (1) its number of DOFs is independent of the number of serial chains which make up the mechanism; (2) it has no kinematical singularities; (3) it is designed to move on rails, and therefore its workspace is much larger than that of a conventional parallel manipulator; and (4) without changing the number of DOFs and the kinematics of the mechanisms, the number of the serial chains can be reconfigured according to the needs of the tasks. These properties make the mechanism very preferable in practice, especially for such tasks as joining huge ship blocks, in which the manipulated objects vary dramatically both in weights and dimensions. Furthermore, the mechanism can be used as either a fully actuated system or an underactuated system. In the fully actuated case, the mechanism has six DOF motion capabilities and manipulation capabilities. However, in the underactuated case, the mechanism still has six DOF motion capabilities, but it has only five DOF manipulation capabilities. In this paper, both the inverse and forward kinematics are studied and expressed in a closed form. The workspace and singularity analysis of the mechanism are also presented. An example is presented to illustrate how to calculate the kinematics of the mechanism in both fully-actuated and underactuated cases. Finally, an application of such a mechanism to manufacturing industry is introduced.

Structural Constraint and Motion Mode Analysis on Parallel Mechanism with Bifurcated Motion

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Optimal Design of a Novel 4-Degree-of-freedom Parallel Mechanism with Flexible Orientation Capability

A novel reconfigurable parallel mechanism constructed with spatial metamorphic four-link mechanism

Analysis and Optimization of a Novel Planar 5R Parallel Mechanism with Variable Actuation Modes

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Type Synthesis of Non-Overconstrained and Overconstrained Two Rotation and Three Translation (2R3T) Parallel Mechanisms with Three Branched Chains

Motion Characteristics Analysis of a Novel 2R1T 3-UPU Parallel Mechanism

Research on a new method for the degree of freedom analysis of parallel mechanism

A Kinematotropic Parallel Mechanism Reconfiguring Between Three Motion Branches of Different Mobility

Kinematic analysis of a flexible six-DOF parallel mechanism

A novel compliance modeling method for compliant parallel mechanisms and its application

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Kinematic, dynamic, and performance analysis of a new 3-DOF over-constrained parallel mechanism without parasitic motion

Finite displacement screw-based group analysis of 3PRS parallel mechanisms

Design and analysis of a class of two-limb non-parasitic 2T1R parallel mechanism with decoupled motion and symbolic forward position solution - influence of optimal arrangement of limbs onto the kinematics, dynamics and stiffness

Optimal Type Selection of 1T2R Parallel Mechanisms Based on Motion/force Transmissibility