Abstract:A relationship between the apparent secondary electron yield (gamma(se)) and the oxygen coverage/oxide layer thickness on an aluminum cathode is obtained in an experiment under a controlled environment. The apparent secondary electron yield (gamma(se)) is deduced from the breakdown voltage between two parallel plate electrodes in a 360 mTorr argon environment using a simple Townsend breakdown model with the assumption that the variation of the apparent secondary electron yield is dominated by the variation of the argon ion induced processes. The oxygen coverage/oxide layer thickness on the aluminum cathode is measured by a semi in situ x-ray photoemission spectroscopy equipment which is directly attached to the discharge chamber. It is found that three phases exist: (1) in the monomonolayer regime, as the oxygen coverage increases from 0 to 0.3, gamma(se) decreases by nearly 40%, (2) as the oxygen coverage increases from 0.3 to 1, gamma(se) keeps nearly constant, (3) as the oxide layer thickness increases from about 0.3 nm to about 1.1 nm, gamma(se) increases by 150%. We propose that, in the submonolayer regime, the chemisorbed oxygen on the aluminum surface causes the decrease of gamma(se) by creating a local potential barrier, which reduces the Auger neutralization rate and the energy gained by the Auger electrons. In the multilayer regime, as the oxide layer grows in thickness, there are three proposed mechanisms which cause the increase of gamma(se) : (1) the work function decreases; (2) resonance neutralization and Auger de-excitation may exist. This is served as another channel for secondary electron production; (3) the kinetic energy of Auger electrons is increased on average, leading to a higher probability for electrons to overcome the surface potential barrier.

Attenuation Mechanism of Secondary Electron Effect of MgO Film Under Electron Bombardment

Preparation of MgO/Au Multilayer Composite Films and Related Studies on Secondary Electron Emission Effect

Electron-Induced Secondary Electron Emission Properties of MgO/Au Composite Thin Film Prepared by Magnetron Sputtering

Au Doping Effect on the Secondary Electron Emission Performance of MgO Films.

Electron-induced Secondary Electron Emission of Zn-doped MgO/Au Composite Film

Influence Of Surface Charging On Secondary-Electron Yield Of Mgo Film

Characterization of MgO/Al2O3 Composite Film Prepared by DC Magnetron Sputtering and Its Secondary Electron Emission Properties

Decay of secondary electron yield of MgO–Au composite film at different incident electron energies

Secondary Electron Emission Enhancement of MgO/Au Composite Film by Adopting a Gold Buffer Layer

Theoretical and experimental investigation of secondary electron emission characteristics of MgO coating produced by atomic layer deposition

Secondary electron emission performance of the surface Ni-doped MgO-Au thin film under continuous electron bombardment

Analysis of secondary electron emission properties of MgO/Au composite film with an Al-doped MgO surface layer

Secondary Electron Emission Enhancement of MgO-Au Composite Film by SiO2 Doping in MgO Surface Layer

Structural Modification of MgO/Au Thin Films by Aluminum Co-doping and Related Studies on Secondary Electron Emission

The measurement of secondary electron emission coefficient of MgO

Influence of Aging Process to the Effective Secondary Electron Emission Coefficient of MgO Film in Surface Discharge ACPDP

Electron ejection from MgO thin films by low energy noble gas ions: Energy dependence and initial instability of the secondary electron emission coefficient

Influence of the Substrate Temperature on the Microstructure and Electron-Induced Secondary Electron Emission Properties of MgO/Au Composite Film

Enhanced Secondary Electron Emission Properties of Sputter-Deposited MgO-Au Composite Film Via Cr Doping

Influence of activation parameters on the thickness of MgO thin film on Ag-3Mg alloy and its secondary electron emission property

Secondary Electron Emission Influenced by Oxidation on the Aluminum Surface: the Roles of the Chemisorbed Oxygen and the Oxide Layer