Impact of wax deposition on development of high pour-point reservoirs

CUI Chuanzhi,LIU Lijun,LI Zhitao,YAO Ronghua,XU Peng,JIN Chaolin,GAO Li

DOI: https://doi.org/10.3969/j.issn.1673-5005.2017.03.012

2017-01-01

Abstract:There has been lack of research on the effect of solid wax deposition to formation damage.To address this issue,solid deposition modeling was conducted to simulate the process of wax deposition in reservoirs with high pour-point oils,in which the impact of solid deposition on porosity and permeability was considered.The relationship between the amount of wax deposited and the induced porosity and permeability change was derived.The effect of injected water temperature (25-65 ℃) on the distribution of water saturation,and the reduction of porosity and permeability was investigated.The simulation results show that cold water injection can reduce the reservoir temperature to below the pour-point of oil.One year injection of the produced water (45 ℃) can also affect the reservoir temperature in near wellbore region up to 30 m,in which the amount of the cumulative wax deposited can be accounted for about 4％ of the pore volume.The gradual reduction of reservoir temperature can affect the water saturation front and cause the ratio of real permeability to initial permeability dropped from 93％ to 72％.With continuous water injection,the increasing trend of deposited wax volume and permeability reduction near wellbore can be reduced and it spreads to the deep reservoir gradually.