Effect of Substrate Concentration on UAFB-Anammox Reactors With Different Carriers

Da-wen GAO,Qing YUAN,Xiao-li HUANG
DOI: https://doi.org/10.11936/bjutxb2015040026
2015-01-01
Abstract:To study the stability of anaerobic ammonium oxidation ( Anammox) bioreactor, three up-flow anaerobic fixed bed ( UAFB ) bioreactors with different carriers ( combined carrier, polyurethane foam carrier and elastic fiber carrier) were set-up with artificial water. The effects of substrate concentration on nitrogen removal and biofilm formation were investigated. Results show that with the polyurethane foam and elastic fiber, the reactor with combined carrier has more stable performance and stronger ability in resistance of high substrate concentration. With the increase of the substrate concentration, the removal rate of NH4+-N and NO2--N of the reactor with combined carrier shows an upward trend after the first drop. When the substrate concentration reaches 226 mg/L, the NH4+-N and NO2--N removal rates are 76. 37% and 77. 53%, respectively, and nitrogen removal loading rate is 1. 32 kg·N/(m3·d). The nitrogen removal rate of the reactor with polyurethane foam carrier is impacted by the substrate concentration significantly. The NH4+-N and NO2--N removal rates are only 44. 90% and 41. 41% at the maximum substrate concentration. The performance of the reactor with elastic fiber carrier is between the former two. Combined carrier had large surface area and high hydrophilic, which makes it easy for the microbe to grow and connect biofilm closely. The ability in resistance of high substrate concentration is the worst, which attributes to lower surface area, roughness and the low microbial interception capacity. Elastic fiber carrier has a high surface roughness which is beneficial for microbe to grow, however the hydrophilcity is low and the biofilm is easy to wash off.
What problem does this paper attempt to address?