Abstract:A completely autotrophic nitrogen removal over nitrite (CANON) reactor was established by seeding ordinary activated sludge with reject water as the influent at (30±3)℃ from a sewage treatment plant in Qingdao. To solve bacterial loss and optimize reactor performance, a suspension of biological carriers was added to the CANON reactor. The result showed that the reactor was successfully started 130 days later. The total nitrogen removal load was up to 0.03 kg·(m3·d)-1, and the average variation ratio of nitrate and ammonia (RNaA) was 0.09, which was close to theoretical value 0.11. The CANON active sludge reactor ran for 300 days. During the stable operation period, the total nitrogen removal rate was stable at 0.20 kg·(m3·d)-1. Red granular sludge was mixed with the effluent of the system, and the particle size of granular sludge was between 1 and 3 mm. The suspension carriers were added to the CANON reactor with a filling rate of 30%. The fillers added to the moving bed biofilm reactor (MBBR) were mature fillers in the nitrifying reactor of the laboratory. The accumulation rate of nitrification was greater than 95%, and the ammonia-oxidized surface load reached 2.0 g·(m2·d)-1. After 30 days of operation and culturing, the system was successfully converted to a pure membrane system, and the biofilm on the surface of the carrier turned pale red. The total nitrogen removal load was up to 0.17 kg·(m3·d)-1. The average RNaA was 0.14, which was slightly higher than the theoretical value of 0.11. This suggested that the CANON sludge adapted to the environment in the MBBR and began to enter a stable stage. The CANON-MBBR ran for 200 days. During the stable operation period, the total nitrogen removal rate was stable at 1.15 kg·(m3·d)-1. The biofilm was bright brick red with a thickness of 150-250 μm. MLSS and MLVSS on the carriers were approximately 10200 mg·m-2 and 9000 mg·m-2, respectively, and the total biomass in the system was approximately 1.5 kg. Through high-throughput sequencing, AOB and AnAOB were found to be the dominant bacteria species on the suspension carrier, with a relative abundance of 26.24% and 30.08%, respectively, and nitrate oxidizing bacteria were successfully suppressed. The above results showed that CANON-MBBR with high-density polyethylene filler as the suspension carrier had good nitrogen-removal efficiency and was conducive to the stable operation of the autotrophic nitrogen removal process.

Microbial Community Characteristics of a Completely Autotrophic Nitrogen Removal over Nitrite (CANON) System Based on High-throughput Sequencing Technology

Shift in microorganism and functional gene abundance during completely autotrophic nitrogen removal over nitrite (CANON) process

Characterization of Functional Microbial Community in a Membrane-Aerated Biofilm Reactor Operated for Completely Autotrophic Nitrogen Removal.

Microbial Characterization of Aggregates Within a One-Stage Nitritation–anammox System Using High-Throughput Amplicon Sequencing

Modeling granule-based completely autotrophic nitrogen removal over the nitrite (CANON) process in an SBR

Autotrophic Nitrogen Removal from Domestic Sewage in MBR-CANON System and the Biodiversity of Functional Microbes.

Performance and microbial community of completely autotrophic nitrogen removal over nitrite (CANON) process in two membrane bioreactors (MBR) fed with different substrate levels.

Nitrogen Removal and Microbial Characteristics in CANON Biofilters Fed with Different Ammonia Levels.

Biodiversity And Quantification Of Functional Bacteria In Completely Au.Totrophic Nitrogen-Removal Over Nitrite (Canon) Process

Stability and Nitrite-Oxidizing Bacteria Community Structure in Different High-Rate CANON Reactors.

Microbial Characteristics of a CANON Reactor During the Start-Up Period Seeding Conventional Activated Sludge.

Performance and microbial ecology of a nitritation sequencing batch reactor treating high-strength ammonia wastewater

Metagenomics reveals microbial community differences lead to differential nitrate production in anammox reactors with differing nitrogen loading rates.

Reactor Performance and Microbial Characteristics of Canon Process with Step-Wise Increasing of C/N Ratio

[Nitrogen Removal Performance of Novel HABR Reactor over CANON Process].

Application of Membrane Bioreactor for Completely Autotrophic Nitrogen Removal over Nitrite (canon) Process

Performance and influence factors of completely autotrophic nitrogen removal over nitrite (CANON) process in a biofilter packed with volcanic rocks

Long-Term Performance of Nitrogen Removal and Microbial Analysis in an Anammox MBBR Reactor with Internal Circulation to Provide Low Concentration DO

Nitrogen Removal Characteristics and Comparison of the Microbial Community Structure in Different Anaerobic Ammonia Oxidation Reactors

[Start-up and Performance Optimization of a CANON Pilot Reactor]

Effects of alkalinity addition with different strategies on CANON process: Start‐up, performance, and microbial community