Abstract:Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 1012 m−3 (the local ion density of the plasma plume is in the level of 1013 m−3), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.

Research status of physics in the coupling area between hall thruster acceleration channel and hollow cathode

Coupling plasma plume of a low-power magnetically shielded Hall thruster with a hollow cathode

Simulation of Electron Streamline Distribution and Coupling Voltage in the Coupling Area of a Hall Thruster

Effects Of Ionization Distribution On Plasma Beam Focusing Characteristics In Hall Thrusters

Coupling Intensity Between Discharge and Magnetic Circuit in Hall Thrusters

Study on the Relation Between Discharge Voltage and Magnetic Field Topography in a Hall Thruster Discharge Channel

Particle‐in‐cell Simulation of the Effect of Curved Magnetic Field on Wall Bombardment and Erosion in a Hall Thruster

On the Effect of Magnetic Field Gradient on the Discharge Characteristics of Hall Thrusters

Effects of the magnetic field gradient on the wall power deposition of Hall thrusters

Experimental and Theoretical Study on Effects of Magnetic Field Topology on Near Wall Conductivity in a Hall Thruster

Particle-in-cell simulation of a Hall thruster

Simulation of discharge process of Hall thruster under the internal and external cathode conditions

Optimization of a Long-Lifetime Hall Thruster with an Internally Mounted Cathode

Latest progress in Hall thrusters plasma modelling

Effect of the Hollow Cathode Heat Power on the Performance of an Hall-Effect Thruster

Thermal analysis of the Hall thruster in vacuum

Measurement of the distribution of charge exchange ions in a Hall-effect thruster plume

Effect of the Cathode on the 3d Plume Distribution of A Hall Thruster

Kinetic effects in a Hall thruster discharge

Physics, simulation and diagnostics of Hall effect thrusters

Effect of Oblique Channel on Discharge Characteristics of 200-W Hall Thruster