Abstract:Efficient and compact plate-fin heat exchangers are critical for large-scale helium liquefaction/refrigeration systems as they constitute major part in the cold box. This study experimentally explores the heat transfer and pressure drop behaviors of helium gas at low temperature in four types of plate-fin channels, namely offset-strip and perforated fins, with different geometrical parameters. A series of cryogenic experiments at approximately liquid nitrogen temperature are carried out to measure the Colbum j factors and Fanning friction f factors with a wide range of Reynolds number. Besides, to reveal the performance variations under different operating temperatures, comparative experiments respectively conducted at room temperature and liquid nitrogen temperature are implemented. The results show that in comparison with the performance data at room temperature, most of j factors are relatively smaller perhaps because the lower aluminum thermal conductivity and higher Prandtl Number at low temperature. Meanwhile, the f factors corresponding to cryogenic conditions exhibit slightly larger even though the core pressure drops show considerable reductions. In contrast to the calculated results from the frequently-used performance curves (Chen and Shen, 1993), the Root Mean Squared Errors of j and f values are correlated within 8.38% and 6.97% for one perforated fin core, 41.29% and 34.97% for three OSF cores, respectively. For OSFs, further comparisons with the previous empirical correlations from literatures are conducted to verify the accuracy of each correlation. Generally, most of the calculated results predict acceptably within the deviations of +/- 25% for the j factors, while the predicted results express relatively large deviations for the f factors. Therefore, it may be revealed that most of the existing correlations were not able to accurately predict the experimental data in consideration of the performance differences under realistic cryogenic operating conditions, which could have significant influences during the design process of cryogenic heat exchangers.

Numerical investigation on stress of plate-fin structures during cool-down of LNG heat exchanger

Stress Characteristics of Plate-Fin Structures in the Cool-Down Process of LNG Heat Exchanger

Investigation on Stress Characteristics of Plate-Fin Structures in the Heat-Up Process of Lng Heat Exchanger

The influence of operation parameters on stress of plate-fin structures in LNG heat exchanger

Experiments and numerical simulation of dynamic cool-down process of stainless steel plate in liquid nitrogen bath

Thermodynamics and Thermal Stress Analysis of Plate-fin Structures in LNG Heat Exchanger

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

Sensitivity and Stress Analysis of Serrated Fin Structure in Plate-Fin Heat Exchanger on Cryogenic Condition

Numerical Simulation of Transient Thermal Stresses in Medium- and High-Temperature Latent Heat Storage Systems with Different Fins: Incorporation of Experimental Stress Cracking

Finite element analysis of strength of mobile cryogenic LNG storage tank

A study on temperature–stress model of pre-cooling for re-condenser in LNG receiving station

Numerical investigation on fatigue life of aluminum brazing structure with fin-plate-side bar under the low temperature thermal-structure cyclic stress

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

Numerical Investigation On Saturated Boiling Flow And Heat Transfer Of Mixture Refrigerant In A Vertical Rectangular Mini-Channel

Three-dimensional Numerical Simulation of Brazed Residual Stress and Its High-Temperature Redistribution for Stainless Steel Plate-Fin Structure

Numerical investigation of heat transfer and pressure drop characteristics on the hot fluid side of the plate-fin precooler under negative pressure conditions

Effect of Fin Types and Prandtl Number on Performance of Plate-Fin Heat Exchanger: Experimental and Numerical Assessment

Numerical investigation on thermal-hydraulic performance of cryogenic LNG in sinusoidal channel with airfoil fins under marine dynamic load

Experimental Study on the Thermal Hydraulic Performance of Plate-Fin Heat Exchangers for Cryogenic Applications

Effect of Lateral Fin Profiles on Stress Performance of Internally Finned Tubes in a High Temperature Heat Exchanger