Abstract:This article proposes an approximate prediction method for slamming loads in parametric rolling condition for large container ships and the method has been validated through model experiments. Up to now, there have been some studies focused on two-dimensional asymmetric slamming analysis. Nevertheless, slamming load prediction in parametric rolling condition should consider not only heave and pitch motions, but also large amplitude roll motion which is usually neglected in analysis. For this purpose, a 6-DOF weakly nonlinear time domain model is adopted to predict the ship motions including parametric roll motion. The consequent roll motions obtained by the proposed model are incorporated in the calculation of impact angle and relative vertical velocity between ship section on the bow flare and wave surface, according to an asymmetric water entry assumption. Slamming impact loads and occurrence probability of slamming are analyzed by the Wagner model. To validate the numerical method, the segmented model experiment of a 10000 TEU container ship was executed and the slamming impact pressures and bending moments were measured for the wave condition and ship forward speed. The calculated pressures are compared with experiments. Based on numerical simulations, the maximum flare slamming pressures and slamming occurrence probability in different speed and wave conditions are investigated. The results indicate that flare slamming pressure is smaller than bottom slamming, but possessing longer lasting time and the occurrence of flare slamming is associated with the cycles of parametric rolling motions. Furthermore, the relationship between slamming pressure and 3-DOF motions namely roll, pitch and heave in the simultaneous simulation is given and the mechanism of flare slamming phenomena in parametric rolling condition is elaborated.

Parametric Analysis of Dynamic Response of Plating Subjected to Slamming Loads

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Dynamic Response Analysis of Rigid-Plastic Circular Plate under Underwater Blast Loading

A Semi-Analytical Method to Evaluate the Dynamic Response of Functionally Graded Plates Subjected to Underwater Shock

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

An Analytical Method for Evaluating the Structural Resistance of Plate Structures under In-Plane Impact Load in Ship-Side Collision Scenarios

Dynamic Response Analysis of a Bulk Carrier by Nonlinear Hydroelastic Method

Numerical Study on the Dynamic Response of the Large Containership's Bow Structure under Slamming Pressures

Dynamical response of square plates under shock loading

Dynamic Response of Underwater Structures Subject to Impact Loads

Simulation of impact load on ship-platform collision

On Dynamic Response of Rectangular Sandwich Plates with Fibre-Metal Laminate Face-Sheets under Blast Loading

Numerical Analysis for Dynamic Response of Sandwich Plates with Lattice and Filling Under Impact Loading

An Analytical Solution for Evaluating Structural Resistance of a Stiffened Plate under Lateral Impact with Large Indentation

Slamming load and hydroelastic structural response of bow flare areas of aluminium fast displacement crafts

Numerical Study of the Wave-Induced Slamming Force on the Elastic Plate Based on MPS-FEM Coupled Method

Dynamic Ultimate Strength Characteristics of Stiffened Plates Subjected to the In-Plane Impact Load and Lateral Pressure

Experimental and Numerical Prediction of Slamming Impact Loads Considering Fluid–Structure Interactions

Experiment Study of Critical Dynamic Loads for Stiffened Panels under Axial Impact

Numerical Prediction And Experimental Validation Of Slamming Load For Large Container Ship Undergoing Parametric Rolling Motion

Numerical simulation analysis on protective performance of sandwich plate system