Local loss and flow characteristic of dividing flow in bifurcated tunnel

Xin ZHANG,Tian-hang ZHANG,Zhi-yi HUANG,Chi ZHANG,Cheng KANG,Ke WU

DOI: https://doi.org/10.3785/j.issn.1008-973X.2018.03.004

2018-01-01

Abstract:A 1/20 scale model for ventilation of bifurcated tunnel was set up in accordance with the similarity criterion of Reynolds (resistance) and Euler (pressure).The three-dimensional CFD model of separation flow at tunnel bifurcation was constructed.By combining scale model tests and CFD simulation,the local loss and flow characteristic of dividing flow at tunnel bifurcation were analyzed.It is noted that,dividing flow local losses of main tunnel are principally incurred by velocity gradient changes and flow separation between fluids and the tunnel wall,while dividing flow local losses in ramp are further affected by mainstream flow turning.As for the dividing flow local loss coefficient of the main line,it almost suffers no impacts of the included angle.Whereas for dividing flow local loss coefficient in ramp,it goes up as the included angle increases when the flow diversion ratio is smaller than 0.5,and declines with the increase of the included angle when it is greater than 0.5.Furthermore,by modifying the Bassett's expressions based on the test data,an equation was established which can be used to precisely calculate dividing flow local loss coefficients for bifurcated tunnel with any included angle within the range from 5° to 15°.The research results can provide theoretical reference for the ventilation calculation of the bifurcated tunnel.