Abstract:To accommodate the integration of renewable energy, coal-fired power plants must take on the task of peak regulation, making the low-load operation of boilers increasingly routine. Under low-load conditions, the phase transition point (PTP) of the working fluid fluctuates, leading to potential flow instability, which can compromise boiler safety. In this paper, a one-dimensional coupled dynamic model of the combustion and hydrodynamics of a supercritical boiler is developed on the Modelica/Dymola 2022 platform. The spatial distribution of key thermal parameters in the furnace and the PTP position in the water-cooled wall (WCW) are analyzed in a 660 MW supercritical boiler when parameters on the combustion side change under full-load and low-load conditions. The dynamic response characteristics of the temperature, mass flow rate, and the PTP position are investigated. The results show that the over-fire air (OFA) ratio significantly influences the flue gas temperature distribution. A lower OFA ratio increases the flue gas temperature in the burner zone but reduces it at the furnace exit. The lower OFA ratio leads to a higher fluid temperature and shortens the length of the evaporation section. The temperature difference in the WCW outlet fluid between the 20% and 60% OFA ratios is 11.7 °C under BMCR conditions and 7.4 °C under 50% THA conditions. Under the BMCR and 50% THA conditions, a 5% increase in the coal caloric value raises the flue gas outlet temperature by 32.7 °C and 35.4 °C and the fluid outlet temperature by 6.5 °C and 9.9 °C, respectively. An increase in the coal calorific value reduces the length of the evaporation section. The changes in the length of the evaporation section are −2.95 m, 2.95 m, −2.62 m, and 0.54 m when the coal feeding rate, feedwater flow rate, feedwater temperature, and air supply rate are increased by 5%, respectively.

4 t/h coal-fired industrial chain boiler model and simulation adjustment

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

Experimental Investigation of the Scaling-Off Location and the Slag Mass in Pulverized Coal-Fired Boiler with Water-Cooled Slag Removal

Development and Applications of the Thermal Calculation System for Universal Industrial Boilers

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

STUDY ON DYNAMIC MATHEMATICAL MODEL AND SIMULATION OF CFB BOILER

Simulation of Dynamic Characteristics of Supercritical Boiler Based on Coupling Model of Combustion and Hydrodynamics

NOx Prediction Model for Multi-coal Admixing Combustion in Boiler

Dynamic Modeling and Simulation of CFB Boiler

Prediction on pulverized coal combustion process in the boiler using computer simulation

Modeling and Simulation of BWR Mechanism Based on RELAP5

Development of Boiler Heat Efficiency Optimization System

Modelling and Simulation of the 50 MWe CFBC Boiler

Modeling and Simulation of the Long-term Dynamic Characteristics of a Supercritical Once-through Boiler

Chain structure modeling method based on lumped-parameter for single-phase section of boilers

Development of Dynamic Simulation Platform for CFBC Boiler

Modeling of a 300 MW Circulating Fluidized Bed Boiler

Dynamic performance analysis and control strategy optimization for supercritical coal-fired boiler: A dynamic simulation

Model Prediction of the Operating Behavior of a Circulating Fluidized Bed Boiler

Experimental test, numerical analysis and thermal calculation modeling of hundreds kW th -class supercritical CO 2 fossil-fired boiler system

A NEW METHOD OF CHAIN STRUCTURE MEDELING ON BOILER'S SINGLE-PHASE HEAT-EXCHANGER