Abstract:The seawater refractive index is an essential parameter in ocean observation, making its high-precision measurement necessary. This can be effectively achieved using a position-sensitive detector-based measurement system. However, in the actual measurement process, the impact of the jitter signal measurement error on the results cannot be ignored. In this study, we theoretically analysed the causes of long jitter signals during seawater refractive index measurements and quantified the influencing factors. Through this analysis, it can be seen that the angle between the two windows in the seawater refractive index measurement area caused a large error in the results, which could be effectively reduced by controlling the angle to within 2.06°. At the same time, the factors affecting the position-sensitive detector's measurement accuracy were analysed, with changes to the background light, the photosensitive surface's size, and the working environment's temperature leading to its reduction. To address the above factors, we first added a 0.9 nm bandwidth, narrow-band filter in front of the detector's photosensitive surface during system construction to filter out any light other than that from the signal light source. To ensure the seawater refractive index's measuring range, a position-sensitive detector with a photosensitive surface size of was selected; whereas, to reduce the working environment's temperature variation, we partitioned the measurement system. To validate the testing error range of the optimised test system, standard seawater samples were measured under the same conditions, showing a reduction in the measurement system's jitter signal from 0.0022 mm to 0.0011 mm, before and after optimisation, respectively, as well as a reduction in the refractive index's deviation. The experimental results show that the refractive index of seawater was effectively reduced by adjusting the measurement system's optical path and structure.

Error analysis of measuring the sound reflection coefficients of underwater acoustic materials by the surface impedance method

Experimental Study on Measuring Reflection Coefficients at Oblique Incidence Using the Inverse Filter

Research on the method for measuring radiated noise by an underwater target in low frequency band based on the vector hydrophone

The Calibration Methods of Hydrophones for Underwater Environmental Sound Measurements or Biomedical Ultrasound Measurements: A Review

Measurement of the Echo Reduction for Passive Materials Based on Inverse Filtering Technique

System error calculation and analysis of underwater sound absorption coefficient measurement experiment

Sound Transmission Loss Correction Due To Hydrophone Fluctuation With Propagation Model

A Method for Estimating the Distance of Near-Ocean-Bottom Sources by Combining VLF Underwater Acoustic Field and Scholte Wave Field

Study on the acoustic in-situ measurement techniques for determining temperature field around seafloor hydrothermal vents taking into account the refraction compensation of sound waves

Research Advance in Underwater Detection of Marine Status for Underwater Vehicles

Study on Reflection Characteristics of Underwater Target and Laser Echo Power

ON SOME FEATURES OF ULTRASOUND REFLECTION WATER-SAMPLE IN AN INCLINED FALL (PHYSICAL MODELING)

Analysis of Sound Fluctuations in Shallow Water in High Sea States

Autocorrelation-function-based Estimation Approach and Variability of Waveguide Invariant in Fluctuated Shallow Water

Measurement Error Analysis of Seawater Refractive Index: A Measurement Sensor Based on a Position-Sensitive Detector

Research and analysis of hydro-acoustic weak signal detection technology

Design and Algorithm Integration of High-Precision Adaptive Underwater Detection System Based on MEMS Vector Hydrophone

Underwater Acoustic Scattering from Multiple Ice Balls at the Ice–Water Interface

Acoustic attenuation coefficient measurement in extreme environments: Experimental characterization of uncertainty in multiple-reflection method

Theoretical Analysis and Experimental Results of Interference Striation Pattern of Underwater Target Radiated Noise in Shallow Water Waveguide

Improved DOA estimation of MEMS vector hydrophone combined with CEEMDAN and wavelet transform for noise reduction