Vibration Characteristics of Discretely-Supported Floating Slab Track under Moving Load

Qiang Huang,Hongwei Huang,Dongmei Zhang

DOI: https://doi.org/10.1007/978-981-13-0011-0_24

2018-01-01

Abstract:Floating slab track (FST), as an effective way to reduce the train-induced vibration, has been widely used in the practice. The FST with discrete support is presented in the paper, consisting of an upper Euler-Bernoulli accounting for the rail and a lower layer free short beam accounting for the floating slab. Dynamic response of the discretely-supported FST under a moving load is determined using mode superposition method combined with Runger-Kutta numerical method. Rail deflection and force in the slab bearing are chosen to evaluate the vibration characteristics of FST. The dynamic response of FST is significantly influenced by the slab length. When the floating slab is not long (less than about 10 m), the rail deflection and force in the slab bearing decrease rapidly as slab length increases. However, the response becomes stable if the slab is too long (more than about 30 m). The vibration-isolation performance of FST is investigated by a parametric study. It is found that a stiffer rail pad or floating slab contributes to reduce the rail deflection and inner force of slab bearing at the same time while heavier slab is adverse in vibration attenuation, and softer slab bearing is effective to reduce the inner force of slab bearing but induces more rail deflection. A possible way to improve the vibration-isolation performance and train moving comfort of FST is to increase the slab length, stiffness of rail pad and flexural stiffness of slab as well as moderate decrease of the stiffness of slab bearing.