Abstract:Since most of the cable-driven parallel manipulators (CDPMs) are small in dimension or low in speed, the self-weight or inertia of the cable is neglected when dealing with the problems of kinematics, dynamics and workspace. The cable is treated as a massless straight line, and the inertia of the cable is not discussed. However, the camera robot is a large-span high-speed CDPM. Thus, the self-weight and inertia of the cable cannot be negligible. The curved cable due to the self-weight is modeled as a catenary to accurately account for its sagging effect. Moreover, the dynamic model of the camera robot is derived by decomposing the motion of the cable into an in-plane motion and an out-plane motion, based on which an iterative-based tension distribution algorithm and a workspace generation algorithm are presented. An optimization model is presented to simultaneously improve the workspace volume, anti-wind disturbance ability and impulse of tensions on the camera and pan–tilt device system (CPTDS) by selecting the proper optimal variables under the linear and nonlinear constraints. An improved genetic algorithm (GA) is proposed, and the simulation results demonstrate that the improved GA offers a stronger ability in global optimization compared to the standard genetic algorithm (SGA). The ideal-point method is employed to avoid the subjective influence of the designer when performing the multi-objective optimization, and a remarkable improvement of the performance is obtained through the optimization. Furthermore, the distribution characteristics of the optimization objects are studied, and some valuable conclusions are summarized, which will provide some valuable references in designing large-span high-speed CDPMs.

Motion control strategy and stability of a cable-based camera robot

Motion control strategy and stability analysis for high-speed cable-driven camera robots with cable inertia effects

Motion Stable Control for Cable-Driven Parallel Camera Robots with High Speeds

On the Cable Pseudo-Drag Problem of Cable-Driven Parallel Camera Robots at High Speeds.

A Smoothing Motion Method for High-Speed Cable-Driven Parallel Camera Robots

Dual-Loop Control of Cable-Driven Snake-like Robots

An Approach to Evaluate Stability for Cable-Based Parallel Camera Robots with Hybrid Tension-Stiffness Properties

Modeling and Control Strategy of a Haptic Interactive Robot Based Ona Cable-Driven Parallel Mechanism

High-Precision Trajectory Tracking Control of Cable-Driven Parallel Robots Using Robust Synchronization.

Trajectory Control Of The Cable-Based Parallel Mechanism Based On Dynamics

Kinematics, Dynamics, and Control of a Cable-Driven Hyper-Redundant Manipulator

Design And Implementation Of The Control Device For A Cable-Driven Camera Robot

Dual-Loop Dynamic Control of Cable-Driven Parallel Robots Without Online Tension Distribution

Adaptive Control of a Spatial 3-Degree-of-Freedom Cable-Driven Parallel Robot with Kinematic and Dynamic Uncertainties

Adaptive Robust Control of the Cable Driven System for Position Tracking

Nonlinear PD control for a curved cable driven parallel robot

Dynamic Modeling, Workspace Analysis and Multi-Objective Structural Optimization of the Large-Span High-Speed Cable-Driven Parallel Camera Robot

Dynamics and Nonlinear Control of a Cable-driven Parallel Robot

Force-Position Hybrid Control of Motion Simulation Platform Based on Cable Drive

Self-feedback Motion Control for Cable-Driven Parallel Manipulators

Visual Servo Control Of Cable-Driven Soft Robotic Manipulator