Abstract:To investigate the failure mode and assess the robustness of steel tubular column-H beam joints under the column removal scenario simulating the progressive collapse, steel beam-to-column assemblies, consisting of a beam-to-column connection with two half-span beams, were statically tested. Specimens were designed using the same H section beam, and the beams were connected to the circular hollow-section column via outer-diaphragms or to the square tubular column via inner-diaphragms. Various connection methods, web bolt layouts and span-to-height ratios of the beam were considered in the specimens. The test results indicate that, with the increase of vertical displacement of the middle column, the failures occur at the connection region and the failure processes vary distinctly due to different connection configurations. Three failure modes are observed in the test, namely the beam-end continuous failure, beam-end interrupted failure and the column-wall failure. When failure occurs at the beam-end, the welded web connection displays a continuous failure process while the bolted web connection performs as an interrupted failure process. The column-wall failure mode merely appears after the bottom inner-diaphragm separates from the adjacent square-column wall and the failure process is little affected by the web connection method. In both beam-end interrupted failure and column-wall failure mode, the joint still develops catenary mechanism after the initial fracture via the sufficient link between the beam and the column, thereby acquiring higher capacity in later stage and showing good robustness. In the beam-end continuous failure process, the catenary mechanism can't be effectively utilized due to the decreasing beam section area, which indicates unsatisfactory robustness of the joint.

Tests for progressive collapse of planar steel frames under a column sudden removal

Collapse tests of RC frame with sudden middle column removal

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Experimental Study on Progressive Collapse Resistance of Steel Frames under a Sudden Column Removal Scenario

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Progressive Collapse of Steel Moment-Resisting Frame Subjected to Loss of Interior Column: Experimental Tests

Analysis of Robustness of Steel Frames Against Progressive Collapse

EXPERIMENTAL STUDY ON PROGRESSIVE COLLAPSE BEHAVIOR OF BEAM-TO-COLUMN ASSEMBLIES WITH ASYMMETRIC SPAN

Analysis Methods for Steel Frames with a Column Removed

Progressive collapse analysis of steel frame structure using removing column method

Experimental and Computational Assessments of Progressive Collapse Resistance of Reinforced Concrete Planar Frames Subjected to Penultimate Column Removal Scenario

Testing and Analysis on Progressive Collapse-Resistance Behavior of RC Frame Substructures under a Side Column Removal Scenario

Structural Performance of Semi-Rigid Composite Frame under Column Loss

Study on Collapse Mechanism of Steel Frame with CFST-columns under Column-Removal Scenario

Progressive collapse resistance of composite frame with concrete-filled steel tubular column under a penultimate column removal scenario

Dynamic progressive collapse analysis of planar frames with concrete-filled steel tubular columns

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Anti-collapse performance of composite frame with special-shaped MCFST columns

Failure Modes and Robustness of Beam-to-column Joints for Steel Tubular Frame Resisting Progressive Collapse

Experimental Studies on Progressive Collapse Resistance of Steel Moment Frames under Localized Furnace Loading

Experimental Study on the Progressive Collapse Resistance of a Two-Story Steel Moment Frame