Influence of dynamic stiffness of primary suspension on vehicle-track coupled vibration

Wen-jing SUN,Dao GONG,Jin-song ZHOU,Zhuo LI

DOI: https://doi.org/10.13465/j.cnki.jvs.2015.05.009

2015-01-01

Abstract:The dynamic model of helical spring in axle box of primary suspension,which can be solved by using dynamic stiffness matrix method,was established to get its dynamic stiffness for studying the effect of waves propagating in helical spring on the vibration isolation performance of primary suspension.Then,the dynamic stiffness characteristics were introduced into the vehicle-track coupled dynamic model which was then solved with Green's function method for comparing the dynamic performances between the models with constant stiffness and dynamic stiffness.The results show that the frequency-dependent stiffness can be calculated efficiently with the dynamic stiffness matrix method and the spring stiffness has a thousand-flod dramatic change at the frequency higher than the first modal frequency.This conclusion was verified with the finite element method.This change led to high vibration displacement transmission rate from wheel to bogie at high frequencies,it was shown that it is nearly equal to 1,while the tramission rate from wheel to car body is about 10 -3 .There are lots of vibration peaks at high frequencies on car body and bogie in vehicle-track coupled dynamic simulation,which are much stronger than those on wheel or rail;the vehicle model including dynamic stiffness of primary suspension spring is more realistic;in order to reduce vehicle vibration,the modal frequency of spring should be raised and the varying of dynamic stiffness amplitude should be as small as possible.