Abstract:To study the standardized evaluation method of vibration comfort of pedestrian bridges, the effect of the transient response term is ignored based on the generalized single degree of freedom (SDOF) method with reference to the American Institution of Steel Construction inc (AISC 11) specification. The resonance conditions between the crowd and the bridge structure are also considered, and the pedestrian bridge structure is simplified to an SDOF system. Then, the peak acceleration of the structure under crowd excitation is directly calculated using the generalized crowd load, and the comfort evaluation is carried out according to the German EN03 code and the Chinese code. For a new pedestrian bridge with hinged piers, human-induced vibration tests were carried out to obtain the structural acceleration time response data under various crowd load excitation conditions, and the acceleration values calculated with the numerical simulation method, the frequency response function method, the generalized SDOF method, and the proposed method were compared with field measurements. The results show that for the normal excitation condition with a crowd density less than or equal to 0.2 person/m2, the acceleration maximum error for the proposed method is between 4.22% and 13.28%. The error is only 6.35% compared with the finite element simulation results. The method can derive peak acceleration by performing only modal tests, eliminating errors caused by different testers and errors due to deflection measurements. It saves considerable time cost and economic cost, and improves the speed of pedestrian bridge comfort evaluation. Therefore, the method proposed for the first time in this study can accurately assess the human-caused vibration comfort of pedestrian bridges with articulated piers. Although the hinged-pier and column steel pedestrian bridge meets the code requirement of a vertical first-order frequency greater than 3 Hz, it is recommended to add TMD vibration damping measures to the bridge in order to improve pedestrian comfort.

A walking crowd-structure interaction model

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Calculation method for human-bridge vertically coupled vibration

Modifications to Social Force Model

Vibration Excitation and Control of a Pedestrian Walkway by Individuals and Crowds

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Dynamic Response Analysis of the Floor Structure under Random Crowd Excitation

Stability Analysis of Pedestrian-Footbridge Interaction Based on a Plane Pendulum Model

Visually-Guided Pedestrian Crowd Simulation

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

Lateral Vibrations of a Cable-Stayed Bridge under Crowd Excitation

Complex patterns of the HIV-1 epidemic in Kuala Lumpur, Malaysia: evidence for expansion of circulating recombinant form CRF33_01B and detection of multiple other recombinants.

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Simplified model of human crowd and parameter design of TMD for footbridges

Dynamic Reliability Analysis of Large-Span Structures under Crowd Bouncing Excitation

Modeling and experimental study on walking human-structure interaction systems subjected to earthquake excitations

A collective motion model based on two-layer relationship mechanism for bi-direction pedestrian flow simulation

Evaluation of Pedestrian Comfort for a Footbridge with Hinged Piers

Parameter Calibration of a Social Force Model for the Crowd-Induced Vibrations of Footbridges

Dynamic response and vibration suitability analysis of the large-span double-connected structure under coupled wind and pedestrian loads

A Dual Adaptive Cellular Automaton Model Based on a Composite Field and Pedestrian Heterogeneity