Abstract:Electrostrictive materials, hard ceramics and soft polymers, have been used as precision actuators in many engineering applications. This study is to examine bang–bang control performance of a hybrid Plexiglas beam laminated with polymeric electrostrictive (RTV 270) actuator and piezoelectric polyvinylidene fluoride (PVDF) sensor layers using both analytical and experimental techniques. Material characteristics are calibrated via static testing first; a hybrid beam model is then fabricated and an experiment set-up, consisting of a bang–bang controller, high-voltage amplifier, data acquisition system and the hybrid beam system, is designed to evaluate vibration control characteristics (i.e., damping ratio estimation) of the hybrid beam subjected to various control conditions. Due to the quadratic behaviour of electrostrictive materials, the controller activates the electrostrictive actuator only in upward motion of the beam, with reference to signals generated from the piezoelectric sensor. Base on constitutive equations and dynamic/control characteristics, a mathematic hybrid beam model is also derived from the electrostrictive thin shell theory and its dynamic responses, based on the finite difference discretization, are simulated to predict damping ratios resulting from control forces induced by the electrostrictive actuators. Dynamic responses (with and without control) of the physical beam model are measured and compared with simulation results. Favourable comparison suggests that the mathematical model describes the experimental model very well and its application to other advanced structures can be proceeded.

Independent modal control on cantilever beam based on hybrid photovoltaic/piezoelectric actuation mechanism

Independent Modal Control Of Beams With Spatially Distributed Orthogonal Photostrictive Actuators

A Hybrid Photovoltaic/flexoelectric Actuation Mechanism Applied to Precision Actuation and Vibration Control of Beams

Independent Modal Control of Circular Rings Based on Non-contact Hybrid Photostrictive/piezoelectric Acutation Mechanism

Collocated independent modal control with self-sensing orthogonal piezoelectric actuators (theory and experiment)

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Vibration Control of Cylindrical Shells with a Hybrid Photovoltaic/piezoelectric Actuation Mechanism

Research on Constitutive Model of Hybrid Photovoltaic/Piezoelectric Actuation Mechanism

A New Multi-DOF Photostrictive Actuator for Dynamic Control of Shells: Modeling and Analysis

Mathematical Model and Characteristic Analysis of Hybrid Photovoltaic/piezoelectric Actuation Mechanism

Photonic Control Of Plates Laminated With Multi-Dof Photostrictive Actuators

Distributed Modal Identification and Vibration Control of Continua: Piezoelectric Finite Element Formulation and Analysis

Distributed Shell Control with A New Multi-Dof Photostrictive Actuator Design

Photodeformation Based Optomechanical Shell Actuators Applied to Vibration Control of Continua: A Sensitivity Study

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

Non-Uniform Actuations Of Plates And Shells With Piezoelectric And Photostrictive Skew-Quad Actuator Designs

Nonlinear Opto-Electromechanics and Photodeformation of Optical Actuators

Distributed Orthogonal Filtering of Piezoelectric Shell Actuators

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Non Contact Precision Actuation and Optimal Actuator Placement of Hybrid Photostrictive Beam Structronic Systems

Design and testing of a hybrid polymeric electrostrictive/piezoelectric beam with bang–bang control