Abstract:Vehicle collisions with piers are main threat to bridge structures, thus the impact resistance of pier is significant for bridge structure safety. This paper presents the experimental and numerical work undertaken for investigating the impact process, damage and failure mode, dynamic behavior, and impact resistance evaluation method of reinforced concrete (RC) piers under lateral impact loading. By using a horizontal impact system, a series of simplified truck model collision test on the square sectional RC piers are performed, in which two main designing parameters, i.e., impact velocity and longitudinal reinforcement ratio, are especially concerned. Moreover, the detailed finite element models are established by the commercial program LS-DYNA, which are verified against the test results. It indicates that, the shape of impact force time-history does not exhibit the platform stage compared with that of the conventional drop hammer impact tests attributed to the shear failure mode occurred for the present columns; the damage level, impact force, displacement at impact position and energy dissipation rise with increasing the impact velocity; increasing the longitudinal reinforcement ratio improves the impact resistance of RC piers effectively; a plastic hinge forms with the hoop reinforcement yielding before the shear failure of column; the impact force causes a considerable change of the axial force of RC piers during the impact process. Finally, based on the energy conservation law, the residual displacement at the impact position is adopted and validated as the reasonable criterion for evaluating the impact resistance of RC piers. The present work can provide helpful references for the anti-collision design and impact resistance evaluation of the urban and highway bridge piers.

Model test for effect of lateral collision force on railway bridge and vehicle running safety

Dynamic Analysis of Rockfall Impact on Bridges: Implications for Train Safety

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Dynamic response performance of bridge piers under non-bottom vehicle collision

Effect of Lateral Deformations of a Simply-Supported Beam Bridge on High-Speed Railway Traffic Safety under Earthquake Action

Study on a 3D Train-Track-Bridge System Dynamic Behavior Subjected to Over-Height Collision Force

Scaled Model Test for Collision Between Over-Height Truck and Bridge Superstructure

Study on the influence of damage characteristics of longitudinal ballastless track on the dynamic performance of train-track-bridge coupled systems

Effect of near-fault vertical seismic excitation on running safety of trains on high-speed railway bridges

Running safety assessment of a train traversing a three-tower cable-stayed bridge under spatially varying ground motion

Tests for Collision Between Over-High Trucks and Steel Bridge Superstructures

Finite-element and simplified models for collision simulation between overheight trucks and bridge superstructures

Analysis of Train Derailment after Hitting the Pier of Tongling Yangtze River Bridge Combined Road with Railway

A Case Study of Dynamic Response Analysis and Safety Assessment for a Suspended Monorail System

Study of Ground Vibration Caused by High-Speed Trains Through Bridges Based on Finite Element Model: Test Validation

Assessment of the Strengthening of Existing Benchmark Monorail Railway Bridge: A Case Study of a Generic Method for Lateral Reinforcement

Damage Model of Bridge Bearing and Its Influence on Train-Track-Bridge Dynamic System

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Dynamic Response Analysis of Long-Span Continuous Bridge Considering the Effect of Train Speeds and Earthquakes