Abstract:Composite overwrapped pressure vessels (COPVs) are widely used in the field of high-pressure gas storage and transportation because of their light weight and high strength. In engineering, autofrettage is usually used to improve the fatigue life of composite pressure overwrapped vessels with metal liners. However, excessive pressure of autofrettage could cause buckling damage to the metal liner. In order to determine the upper limit of autofrettage (critical buckling pressure) and analyze its influence on the safety factor of COPVs, a theoretical calculation model of the critical buckling pressure about the metal liner was established based on classical laminated plate theory and the confined buckling theory. Then, a COPV with thin-walled welded metal liner was prepared by fiber winding process. In order to monitor and judge the buckling damage mode of the liner, the circumferential strain of the COPV's cylinder was measured by loading and unloading step-by-step. Finally, the influence of materials and dimensions of the metal liner on the pressure ratio (the ratio of the first layer failure pressure to the critical buckling pressure of the COPV's metal liner) was discussed. When the diameter to thickness ratio (R/t) of the metal liner was greater than 35, the pressure ratios of the 6063-T5 aluminum alloy liner and the S30408 stainless steel liner both exceeded 2.25. However, the pressure ratio of 6061-T6 aluminum alloy liner with R/t ≤ 60 was lower than 1.85, which shows that the metal liner with higher yield strength and lower elastic modulus has higher utilization rate of fiber winding layers. Due to the fact that the current design standards only ensure the reliability of COPVs through safety factors and various type testing with their evaluation methods, the proposed theoretical calculation method can reduce the uncertainty of COPVs during the design and testing rounds.

Liner buckling analysis of composite overwrapped pressure vessel

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Theoretical and Experimental Research on The Critical Buckling Pressure of The Thin-Walled Metal Liner Installed in The Composite Overwrapped Pressure Vessel

Structure Analysis of Composite Pressure Vessel with Ultra-Thin Metallic Liner

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

Stress and Damage Analyses of Composite Overwrapped Pressure Vessel

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Nonlinear analyses of thermal postbuckling problems of liner shells

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Analytical and numerical buckling of bi-material pipelines reinforced by novel composite polyhedral linings

Numerical analysis of the liners encased in a rigid cavity

Design and Fabrication of Carbon-Fiber-wound Composite Pressure Vessel with HDPE Liner

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

WITHDRAWN: Buckling and strain response of a filament winding composite cylindrical shell subjected to hydrostatic pressure: Analytical solution and testing

Postbuckling and Damage Analysis of Composite Laminated Hollow Cylinder under Lateral Pressure

Buckling performance of the encased functionally graded porous composite liner with polyhedral shapes reinforced by graphene platelets under external pressure