Abstract:Damping is an important factor contributing to errors in the measurement of rotational inertia using the torsion pendulum method. Identifying the system damping allows for minimizing the measurement errors of rotational inertia, and accurate continuous sampling of torsional vibration angular displacement is the key to realizing system damping identification. To address this issue, this paper proposes a novel method for measuring the rotational inertia of rigid bodies based on monocular vision and the torsion pendulum method. In this study, a mathematical model of torsional oscillation under a linear damping condition is established, and an analytical relationship between the damping coefficient, torsional period, and measured rotational inertia is obtained. A high-speed industrial camera is used to continuously photograph the markers on a torsion vibration motion test bench. After several data processing steps, including image preprocessing, edge detection, and feature extraction, with the aid of a geometric model of the imaging system, the angular displacement of each frame of the image corresponding to the torsion vibration motion is calculated. From the characteristic points on the angular displacement curve, the period and amplitude modulation parameters of the torsion vibration motion can be obtained, and finally the rotational inertia of the load can be derived. The experimental results demonstrate that the proposed method and system described in this paper can achieve accurate measurements of the rotational inertia of objects. Within the range of 0–100 × 10−3 kg·m2, the standard deviation of the measurements is better than 0.90 × 10−4 kg·m2, and the absolute value of the measurement error is less than 2.00 × 10−4 kg·m2. Compared to conventional torsion pendulum methods, the proposed method effectively identifies damping using machine vision, thereby significantly reducing measurement errors caused by damping. The system has a simple structure, low cost, and promising prospects for practical applications.

Analysis and Design of the Moment of Inertia(MOI) Measuring Instrument with High Accuracy

Measurement of Moment of Inertia Based on Real-time Computing Damping Ratio

Research on the Measurement Technology of Rotational Inertia of Rigid Body Based on the Principles of Monocular Vision and Torsion Pendulum

Measurement of Moment of Inertia Based on Hilbert Transform

Measurement of a moment of inertia of a sample piece under nonlinear damping condition

Research on Measuring Technology of Moment of Inertia for Objects with Complex Shape

Measurement of Time-varying Moment of Inertia Based on Hilbert Transform

Measurement of Flight Object's Moment of Inertia Using Torsion Pendulum

Design of Rotational Inertia Measure-Meter for Great Missile

Research on Measuring Methods for Aircraft's Moment of Inertia based on Composite Torsion Pendulum Movement

Torsional pendulum vibration model with nonlinear damping and its application in measurement of moment of inertia of large aled plate-like objects

Design Optimization of Compound Pendulum System for Measurement of Micro Thrust

A demodulation algorithm for processing rotational inertia signals using a torsion pendulum method based on differentiation and resonance frequency analysis

IMPROVEMENT OF EXPERIMENTAL IDENTIFICATION METHOD WITH TRIFILAR TORSIONAL PENDULUM FOR INERTIA PROPERTIES OF LARGE-SCALE RIGID-BODY

The Measuring Principle and Method of Moment of Inertia of the Complicated and Anomalous Rigid Body

Study on Electro-Magnetic Suspend System Damping of a Tes t Rig for Measuring Inertia Moment

Study on Detection Method of Moment of Inertia with Torsion Pendulum Method in Frequency Domain Based on FFT

Comparison of Two Experiments Based on a Physical and a Torsion Pendulum to Determine the Mass Moment of Inertia Including Measurement Uncertainties

A New Method for Measuring Moment of Inertia of the Single Axis Air-Bearing Table

Error analysis of inertia parameters measurement for irregular-shaped rigid bodies using suspended trifilar pendulum

Swing Response Measuring and Nonlinear Error Modification of Suspended Structure System in Pendulum Vibration Mode