Abstract:A passive tuned mass damper (TMD) fabricated using the Reid damping, referred to as the Reid-TMD, is proposed. First, the characteristics of the Reid damping model are introduced, followed by the presentation of a passive variable friction damper to achieve this model. Next, the steady-state response of single-degree-of-freedom structures with the Reid-TMD under a harmonic load is solved by the harmonic balance method (HBM), together with an error analysis of the results. Subsequently, the optimization and control effect of the Reid-TMD damping system are analyzed and compared with the traditional viscous damping TMD. The results show that under the action of a harmonic load or seismic load, the vibration suppression effect of the Reid-TMD with the same mass ratio is essentially equivalent to the traditional viscous damping TMD. In addition, the damping control effect increases with the increase in mass ratio. When the mass ratio is less than 0.05, the energy dissipation coefficient is less than 0.5 and the frequency ratio is less than 0.95. For parameters within this range, the steady-state response of the seismic reduction structure with the Reid-TMD is solved by the HBM. If the parameters of the Reid-TMD are outside this range, the error of the HBM becomes large, and recourse should be changed to general numerical methods. The optimum parameters of the Reid-TMD are determined through an optimization analysis for the mass ratio in the range of 0.005–0.1. While using the Reid-TMD for the vibration absorption design, the optimum parameters can be acquired directly by using the established tables. Because the passive variable friction damper has good durability and economy, the application of the Reid-TMD is beneficial to shock absorption technology.

Control effect analysis on pendular vibration of suspensory structures with varied mass distribution controlled by dual TMD systems

TMD Control Analysis of Reticulated Shells for Wind Vibration

Structural Pendulum Vibration Control Methods Based on Tuned-Rotary-inertia-damper(ⅰ):Parametric Impact Analysis and Bench-Scale Model Tests

PASSIVE CONTROL ANALYSIS ON PENDULAR VIBRATION OF SUSPENSORY STRUCTURES SUBJECT TO POINT SOURCE EXCITATIONS

Principles and Applications of Structural Pendular Vibration Control

Steady-State Response and Damping Control Effect of Reid-TMD

A Double-Tuned Pendulum Mass Damper Employing a Pounding Damping Mechanism for Vibration Control of High-Rise Structures

Structural Spatial Swinging Vibration Control

Parameter Optimization and Control Characteristics Analysis of TLMD System Based on Phase Deviation

A Novel Tuned Liquid Mass Damper for Low-Frequency Vertical Vibration Control: Model Experiments and Field Tests

Research on Vibration Suppression of Nonlinear Tuned Mass Damper System Based on Complex Variable Average Method

Vibration Control Effect Analysis on Tuned Mass Damper System Used in Urban Transportation

Swinging Motion Control Of Suspended Structures: Principles And Applications

Experimental study on vibration control performance of TMD-STF damper

Study on control of wind induced vibration of Changzhou E120 Theme Park Landscape Tower with MTMD

Graphical Design Methodology of Multi-Degrees-of-Freedom Tuned Mass Damper for Suppressing Multiple Modes

Development and Vibration Control of Frequency Adjustable Tuned Mass Damper Based on Magnetorheological Elastomer

A Novel Assembled Pendulum-Type ATMD for Structural Vibration Control

Vibration suppression of pipe system with tuned mass damper

Optimal Design of Tuned Mass Dampers With Variable Inerter and Damping

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers