Abstract:In this study, a comprehensive examination was conducted to explore the technology involved in the recovery of waste heat from flue gas emitted by a 1000 MW unit. Traditional methods are constrained in their ability to harness waste heat from flue gas solely for the purpose of generating medium-temperature water. The system being examined not only recovers waste heat but also utilizes it to generate steam, thereby greatly improving resource efficiency. The process entails utilizing the flue gas to heat water to a certain temperature, followed by subjecting it to flash evaporation. This process leads to the generation of low-pressure waste heat steam. Within the steam ejector, the waste heat steam combines with high-pressure motive steam extracted from the source, resulting in the formation of medium-pressure steam. Within the steam ejector, the waste heat steam blends with high-pressure motive steam drawn from the source, forming medium-pressure steam that eventually feeds into the A8 steam extraction pipe (low-pressure turbine pumping pipe). The present study examines the fluctuation patterns in motive steam flow, suction coefficient, waste heat steam volume, and outlet temperature of the flue water heat exchanger when different motive steam sources are used. Additionally, the research calculates the reduction in CO2 emissions, the coal consumption for power supply, and the cost savings in fuel for the retrofitted system. The findings indicate that maximizing energy utilization can be achieved by operating the retrofitted unit at the lowest feasible waste heat steam pressure. The implementation of the new system has resulted in a substantial decrease in coal consumption for power supply. When employing main steam as the extraction steam source, the consumption of coal for power generation decreases in proportion to the decrease in waste heat steam pressure while maintaining a constant unit load. When the waste heat steam pressure reaches 0.0312 MPa, the recorded coal consumption for power generation varies between 289.43 g/kWh at 100% turbine heat acceptance (THA) and 326.94 g/kWh at 30%THA. When comparing this performance with the initial thermal power plant (TPP) unit, it demonstrates reductions of 2.26 g/kWh and 1.52 g/kWh, respectively. After implementing modifications to this 1000 MW unit, it is projected that the annual CO2 emissions can be effectively reduced by 6333.97 tons, resulting in significant cost savings of approximately USD 0.23 million in fuel expenses. This system exhibits considerable potential in terms of emission reduction and provides valuable insights for thermal power plants aiming to decrease unit energy consumption.

Initial Analysis on Flue Gas Waste Heat Utilization System in Power Plant

Performance Analysis and Optimization of Flue Gas Waste Heat Recovery System of a 600MW Coal-Fired Power Plant

An Improved System for Utilizing Low-Temperature Waste Heat of Flue Gas from Coal-Fired Power Plants

Performance analysis of an efficient waste heat utilization system in an ultra-supercritical coal-fired power plant

Application Study Of A Cchp System Operating With The Flue Gas And Geothermal Energy

Thermo-economic analyses of the waste heat and water recovery system from flue gas by heat pump integrated with different heat utilization ways in coal-fired power plant

Research on flue gas waste heat recovery system in gas-steam combined cycle power plant

Research and Application of Flue Gas Waste Heat Recovery in Co-generation Based on Absorption Heat-exchange

4E analysis and multiple objective optimizations of a cascade waste heat recovery system for waste-to-energy plant

Analysis and Evaluation of Multi-Energy Cascade Utilization System for Ultra-Supercritical Units

Utilization Of Industrial Waste Heat For District Heating A Case Study

An Ejector and Flashbox-Integrated Approach to Flue Gas Waste Heat Recovery: A Novel Systematic Study

Computational boundary improvement and performance optimization of the flue gas waste heat cascade utilization system of the ultra-supercritical 1000 MW generator set

Analysis of an Exhaust Heat Recovery Process of Integrating Bypass Flue and Condensate Air Heater for Efficient Power Generation

The Potential and Approach of Flue Gas Waste Heat Utilization of Natural Gas for Space Heating

Thermal economic analysis on low-temperature waste heat recovery

Research on Thermodynamic Characteristics of the Saturated Flue Gas Waste Heat Recovery to Reduce Turbine Extraction Steam

Performance evaluation and thermal analysis of heat pipe flue gas waste heat utilization system

Application of Exergy Analysis in Flue Gas Condensation Waste Heat Recovery System Evaluation

Performance Analysis of an Absorption Heat Pump System for Waste Heat and Moisture Cascade Recovery from Flue Gas.

A novel flue gas waste heat recovery system for coal-fired ultra-supercritical power plants