Abstract:Rotor crack occurs frequently in rotating machinery. It is of great significance to study the vibration mechanisms of the cracked rotor-bearing system, which can provide proofs for crack online monitoring. In this paper, a new dynamic model of the cracked rotor-bearing system is developed using the rigid body element (RBE) method, and vibration response analysis is then carried out. The rotor is discretized as a set of RBEs, and each two adjacent RBEs is connected by an elastic joint (EJ). Each EJ is modeled with six imaginary springs (three translational springs and three rotational springs). The breathing crack is modeled through time-varying stiffnesses of imaginary springs, which are obtained using real-time parameters (area, cross-section moment of inertia, and polar moment of inertia) in four processes (crack fully closed, crack partially opened, crack fully opened, and crack partially closed) in a full rotation angle. The interactions of adjacent RBEs are then given based on the force and moment analysis, and the bearing forces are obtained based on two models (i.e., equivalent spring-damper model, and Gupta bearing model). The equations of motions of the cracked rotor-bearing system are developed through Newton-Euler equations and solved by the fourth-order Runge-Kutta-Fehlberg method with a step-changing criterion. The displacement responses are then obtained, and the frequency spectrums of displacement responses and their instantaneous frequencies (IFs) under different rotation speeds are analyzed. Simulation results of the cracked rotor-bearing system are in good agreement with previously published results and experiment results. What’s more, analysis results show that the frequency spectrum of IF can be an indicator for online monitoring of the rotor crack.

Analysis of Nonlinear Vibration Characteristics of the Hollow Cracked Rotor Shaft of a Large-scale Elliptical Oscillating Sieve

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Stiffness and dynamical behavior of Jeffcottrotor with cross crack

A Study of the Vibration of a Rotor with an Opening Crack

Stability and Dynamics of Rotor System with 45° Slant Crack on Shaft

Dynamics Behavior of Multi-Disk Flexible Rotor System with Transverse Crack

Dynamic Instability and Steady-State Response of an Elliptical Cracked Shaft

THE SWING VIBRATION, TRANSVERSE OSCILLATION OF CRACKED ROTOR AND THE INTERMITTENCE CHAOS

Dynamic characteristics of a open crack in hollow shaft rotor system

The Vibration Of A Transversely Cracked Rotor Supported By Anisotropic Journal Bearings With Speed-Dependent Characteristic

The influence of cracks in rotating shafts

Experimental Study On Lateral And Torsional Vibration Of Cracked Rotor With Torsional Excitation

Stability And Dynamics Of A Rotor System With A Slant Crack On The Shaft

Torsional vibration characteristics and experimental study of cracked rotor system with torsional oscillation

Dynamic Analysis of the Rotor System with a Semi-Elliptical Fronted Crack on the Shaft

Vibration Analysis of Rotor with Transverse Surface Cracks

Modeling and Analyzing of Vibration in Working Crankshaft with Cracks

Nonlinear Vibration Analysis of A Cracked Rotor-Ball Bearing System During Flight Maneuvers

Dynamic modeling and vibration analysis of cracked rotor-bearing system based on rigid body element method

Dynamics of a cross beam with a straight crack in a mining linear vibrating screen

Vibrations Of Cracked Gear-Rotor System: Tooth Root Crack Versus Shaft Transverse Crack