Numerical analysis of supercritical CO2 characteristics flowing through electronic expansion valve

Fangyong Hou,Ze Zhang,Changhai Liu,Juanli Ma,Xiufang Liu,Yu Hou

DOI: https://doi.org/10.3969/j.issn.1000-6516.2017.05.004

IF: 2.134

2017-01-01

Cryogenics

Abstract:When supercritical CO2 flows through an electronic expansion valve (EEV),the state of CO2 changes from supercritical state to liquid,and finally into the gas-liquid two-phase state.A two-dimension model of supercritical CO2 flowing through an EEV was established,and the expansion process was simulated numerically using the homogeneous flow model.The results show that the parameters of supercritical CO2 changed slightly when entering the expansion valve along the flow.At the bottom of the valve plug,the parameters exhibit a drastic change.The closer to the expansion valve symmetry center,the pressure of CO2 is higher.The pressure achieves minimum when close to the wall.The maximum flow rate of the working fluid occurs at the tip of the valve plug,reaching 179 m/s.When CO2 flows through the tip of valve plug,the CO2 pressure decreases drastically.The mass transfer rate between the two phases increases sharply,and the CO2 phase change occurs.With the decrease of CO2 pressure in EEV,the CO2 gas fraction increases continuously,and the gas fraction is inversely related to the pressure of CO2.