Abstract:Abstract The purpose of this paper is to investigate the effect of the annealing process at 1000 °C on machining parameters using contemporary techniques such as principal component analysis (PCA), hyper-parameter optimization by Optuna, multi-objective particle swarm optimization, and theoretical validation using the machine learning method. Results after annealing show that there will be a reduction in surface roughness values by 19.61%, tool wear by 6.3%, and an increase in the metal removal rate by 14.98%. The PCA results show that the feed is more significant than the depth of cut and speed. The higher value of the composite primary component will represent optimal factors such as speed of 80, feed of 0.2 and depth of cut of 0.3, and values of principal components like surface roughness ( Ψ 1 = 64.5), tool wear ( Ψ 2 = 22.3) and metal removal rate ( Ψ 3 = 13.2). Hyper-parameter optimization represents speed is directly proportional to roughness, tool wear, and metal removal rate, while feed and depth of cut are inversely proportional. The optimization history plot will be steady, and the prediction accuracy will be 96.96%. Machine learning techniques are employed through the Python language using Google Colab. The estimated values from the decision tree method for surface roughness and tool wear predictions using the AdaBoost algorithm match well with actual values. As per MOPSO (multi-objective particle swarm optimization), the predicted responses are as follows; surface roughness (2.5 μm, 100, 02, 0.45), tool wear (0.31 mm, 40, 0.40, 0.60), and MRR (material removal rate) (5145 mm 3 /min, 100, 0.4, 0.15). As validated by experimentation, there are small variations as the surface roughness varied by 1.56%, tool wear by 6.8%, and MRR by 2.57%.

Improvement of Principal Component Analysis and Its Application in Engineering Materials Comprehensive Evaluation

Study on Correlation Between Parameters of "single Factor" Constitutive Model and Temperature for 7050 Aviation Aluminum-Alloy

Heterogeneous Material Design Using A Pca-Based Microstructure Representing Method

A Novel PCA-based Microstructure Descriptor for Heterogeneous Material Design

Faults Detection and Isolation Based on PCA: an Industrial Reheating Furnace Case Study

Performance Monitoring of Chemical Process Based on Multivariable Statistical Technology

Modeling the Correlation of Composition-Processing-Property for TC11 Titanium Alloy Based on Principal Component Analysis and Artificial Neural Network

Comprehensive Evaluation of Material Machinability Via Improved Radar-graph Method

Improved PCA with Application to Fault Detection

Improved PCA with Optimized Sensor Locations for Process Monitoring and Fault Diagnosis

Study on strengthening effects of Zr-Ti-Nb-O alloys via high throughput powder metallurgy and data-driven machine learning

An Application of Principal Component Analysis to the Evaluation of the Matching Gap Between Auto-body Stampings

Principal component analysis for multiple quality characteristics optimization of metal inert gas welding aluminum foam plate

Annealing of Monel 400 Alloy Using Principal Component Analysis, Hyper-parameter Optimization, Machine Learning Techniques, and Multi-objective Particle Swarm Optimization

Process Performance Analysis and Improvement for the Manufacture of 6063 Aluminum Alloy

Integrated Computing Accelerates Design and Performance Control of New Maraging Steels

Study on Applicability of Objective Weighted Model in the Selection of Engineering Materials

Real-time Monitoring of Chemical Processes Based on Variation Information of Principal Component Analysis Model

Loading-Based Principal Component Selection for PCA Integrated with Support Vector Data Description

Improved Performance of Process Monitoring Based on Selection of Key Principal Components

Material Identification of Particles in Space-Borne Electronic Equipments Based on Principal Component Analysis