Abstract:The conventional sintering process of municipal solid waste incineration (MSWI) fly ash is always energy intensive. The process forms a cracked structure because of the difficulty in forming the liquid phase to enhance the mass transfer process. Therefore, exploring a new disposal method to simultaneously decrease the sintering temperature and improve the mechanical and heavy metal leaching properties of sintered samples is necessary. In this study, a pressure-assisted sintering treatment was introduced to dispose fly ash by varying the chemical composition and mechanical pressure at relatively low temperatures (300-500 °C). The results revealed that the compressive strength of treated samples increased with the CaO/SiO<sub>2</sub> molar ratio increasing from 0.5 to 1.0, and a maximum value of 238.28 ± 8.50 MPa was obtained. The heavy metal leaching concentration results demonstrated a low risk of contamination in the treated samples. Microstructure analyses suggested that the densification process was enhanced with increased mechanical pressure, and the formed calcium silicates and aluminosilicates positively affected the compressive strength. Moreover, smaller crystal lattices were observed during aggregation formation, suggesting the restraint of anomalous crystal growth, which accelerated the densification process and increased the compressive strength. Moreover, the mass transfer process during the pressure-assisted sintering process was enhanced compared with the conventional thermal process, which was reflected by the transformation of elements from homogeneous to heterogeneous distribution. Therefore, the improved mechanical properties and leaching behavior of heavy metals were attributed to the densified microstructure, formation of new minerals, and enhanced driving force during the pressure-assisted sintering process. These findings suggest that pressure-assisted sintering is a promising method for maximizing the reutilization and minimizing the energy consumption simultaneously to dispose fly ash.

SOLIDIFICATION TREATMENT AND ENGINEERING APPLICATION OF A NEW SOLIDIFYING AGENT TOMAWI FLY ASH

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Use of New Bacterial Strain in Solidification and Stabilisation of Municipal Solid Waste Incineration Fly Ash

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

A New Solidification Technology Of Municipal Solid Waste Incineration Fly Ash And Its Application In Asphalt Mixture

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Double Consolidation Technology for the Stabilization of Heavy Metal Ions in the Fly Ash Generated by the Incineration of Municipal Solid Waste

Study on Cement Solidification Technology in Treating with Fly Aash

Stabilization of Heavy Metals in Municipal Solid Waste Incineration Fly Ash in Circulating Fluidized Bed by Microwave-Assisted Hydrothermal Treatment with Additives

Investigation of Mechanochemically Treated Municipal Solid Waste Incineration Fly Ash as Replacement for Cement

Study on semi-dynamic leaching and microstructure characteristics of MSWI fly ash solidified sediment

Fly Ash Treatment by Desalination Couples with Solidification of Heavy Metals

Manufacture of alkali-activated cementitious materials using municipal solid waste incineration (MSWI) ash: Immobilization of heavy metals in MSWI fly ash by MSWI bottom ash

The Resource Utilization and Environmental Assessment of MSWI Fly Ash with Solidification and Stabilization: A Review

Recent Advances of Disposal and Utilization of Fly Ash from MSW Incineration

Investigation of waste alkali-activated cementing material using municipal solid waste incineration fly ash and dravite as precursors: Mechanisms, performance, and on-site application

High-efficient stabilization and solidification of municipal solid waste incineration fly ash by synergy of alkali treatment and supersulfated cement

Mechanical property and heavy metal leaching behavior enhancement of municipal solid waste incineration fly ash during the pressure-assisted sintering treatment