Abstract:Environmentally friendly energy storage materials with high energy storage performance and excellent stability for applications in pulse power systems are urgently needed. SrTiO3-based ceramics have a relatively high dielectric constant and a high breakdown strength (BDS). However, a low polarization strength in this system often yields a low energy storage density. In this paper, high energy storage performance of SrTiO3-based ceramics with the composition of (Sr1-x-y-φNayBix□φ)TiO3 (abbreviated as zSNBT, where x = 0.2 + 0.3z, y = 0.5z, φ = 0.1–0.1z, and z = 0.8–0.1; □ represents Sr vacancies) was achieved using a synergistic effect of chemical modification and defect chemistry. With the decrease of z, the ferroelectric macro-domain of zSNBT ceramics vanishes due to the original effect of paraelectric SrTiO3, significantly improving the BDS and energy storage performance. When z = 0.2, the material exhibited a single cubic phase structure with a nearly hysteresis-free P-E loop. The maximum BDS reached 390 kV/cm, and under such electric field, a large recoverable energy storage density (Wrec) of 3.94 J/cm3 and ultrahigh energy efficiency (η) of 94.71% were achieved simultaneously. Meanwhile, the 0.2SNBT ceramic showed good thermal stability and satisfying cycling stability in the temperature range of 20–160 °C. In addition, the 0.3SNBT ceramic demonstrated outstanding thermal stability with an ultrafast discharge speed (t0.9 ≤ 26 ns) in the temperature range of 20–180 °C. Furthermore, a simulation model containing grains and grain boundaries was established to explain the enhanced BDS and the energy storage performance. Fine and uniform grains with many grain boundaries significantly hindered the propagation of breakdown cracks, yielding a higher BDS value. These results indicate that zSNBT ceramics are promising environmentally friendly materials for pulse power capacitor applications.

PROGRESS OF RESEARCH ON PROPERTIES AND APPLICATION OF SrTiO3-BASED ELECTROCERAMIC MATERIAL

Recent Development in the Preparation of Strontium Titanate Ceramic Materials

Improving Energy Storage Properties in (ba0.75sr0.1bi0.1)(ti0.9zr0.1)o3 Ceramic Thick Films by Adding (sb0.5li0.5)tio3, Domain Engineering and Defect Engineering

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Research progress of BaTiO3-based ferroelectric ceramic materials with high permittivity and high stability

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

The thermal sensitivity and dielectric properties of SrTiO3-based ceramics

Excellent Energy Storage Properties and Multi-Scale Regulation Mechanism of Sr(Zr 0.5 Ti 0.5 )O 3-(Na 0.5 Bi 0.5 ) 0.94 Ba 0.06 TiO 3 Ceramics

Excellent Energy Storage Properties and Multi-Scale Regulation Mechanism of Sr(Zr0.5ti0.5)O3-(Na0.5bi0.5)0.94ba0.06tio3 Ceramics

Achieving Excellent Electrocaloric Properties Near Room Temperature in Ba0.75sr0.25tio3 Based Pb-Free Ceramics by Phase Modification

Study Progress on Capacitor-varistor Bifunctional Material

Ultrahigh Energy Storage Properties in (Sr0.7Bi0.2)TiO3-Bi(Mg0.5Zr0.5)O3 Lead-Free Ceramics and Potential for High-Temperature Capacitors

Realizing ultrahigh energy-storage density in Ca0.5Sr0.5TiO3-based linear ceramics over broad temperature range

Research and Development of High Temperature Electrothermal Materials

A Method for Improving Temperature Stability of Dielectric Permittivity for BaTiO3 Ceramics

Electrocaloric Effects In Spark Plasma Sintered Ba0.7sr0.3tio3-Based Ceramics: Effects Of Domain Sizes And Phase Constitution

THE STATUS OF RESEARCH OF SBTi-BASED LAYERED STRUCTURE OF FERROELECTRICS CERAMICS MATERIALS

Ultrahigh Energy Storage Properties in (Sr 0.7 Bi 0.2 )TiO 3 -Bi(Mg 0.5 Zr 0.5 )O 3 Lead-Free Ceramics and Potential for High-Temperature Capacitors.

SrTiO3-based thermoelectrics: Progress and challenges

BaTiO3-based Ceramics with High Energy Storage Density

Achieving high energy storage performance and ultrafast discharge speed in SrTiO3-based ceramics via a synergistic effect of chemical modification and defect chemistry