Abstract:The artificial ground freezing method has been widely used in shield tunneling breakthrough working shafts. The freezing effect was mainly considered in the previous research, and the heat generation of the shield machine was not considered, which has great influence in actual engineering. In this paper, a coupling calculation model, considering phase change latent heat, is establishes that by containing the freezing process and heat generation of the shield machine, the model is verified. A numerical simulation is carried out for several working conditions that may occur in actual projects, and the following conclusions are obtained. Although the heat dissipated by the normal tunneling of the shield machine will melt the frozen soil curtain that originally meets the design requirements, the thickness of the frozen soil curtain after melting cannot reach the initial design, though it is still within the safe range. In the process of a continuous rotation working condition, the bottom and sides of a cup-shaped frozen soil curtain are partially melted in the early 6 day stay of the shield machine, and the thickness is reduced to a relatively stable value of 0.8 m. In a temporary shutdown working condition, when the contact surface temperature between the shield machine shell and the frozen soil drops to −12 °C after almost 4 days of shutdown, the shield machine may not keep tunneling forward due to the freezing effect. The research results will benefit the freezing design and management of the shield tunneling breakthrough working shaft under extreme conditions.

Study Status and Outlook on Ground Freezing Theory of Shield Break-In and Out

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Influences of Shield Advance Rate and Abnormal Machine Halt on Tunnelling-Induced Ground Surface Settlements

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Numerical Analysis of Shield Tunnelling Breakthrough Working Shaft by Artificial Ground Freezing Method under Extreme Conditions Considering Phase Change Latent Heat

Study on Design Theory and Method of Geology Adaptability for Earth Pressure Balanced Shield Tunneling Machine

Analysis and Calculation of Superimposed Load Induced by Double Parallel Shield Tunnelling

Application of Analytical Solution to Steady-State Temperature Field by Double-Row-Pipe Freezing and Verification with Field Measurement: A Case Study of Connected Aisle

Numerical Analysis and Comparison of Soil Freezing Schemes for Replacement of Shield Tail Brush in Long-Distance Tunnel Engineering

Field Tests of the Horizontal Freezing Method for Shield Tunneling in Complex Sites

Research on theoretical calculation of long-term ground settlement caused by shield tunneling

Study of Accident Mechanism of Shield Launching Considering Seepage

Analysis of Superimposed Stress of Surrounding Soil Due to Shield Tunneling

Sensitivity Analysis of Different Factors in the New Pipe Curtain Freezing Method under Seepage Conditions

RESEARCH ON POST-CONSTRUCTION SURFACE SETTLEMENT CAUSED BY SHIELD TUNNELING

A REVIEW OF THE RESEARCH ON THE IMPACT OF GROUND LOAD ON ADJACENT EXISTING SHIELD TUNNEL

Research on the Ground Subsidence Mechanism of Cross Passage Caused by Freezing Method Construction

In Situ Monitoring of Frost Heave Pressure During Cross Passage Construction Using Ground-Freezing Method

Finite Element Analysis of Natural Thawing Heat Transfer of Artificial Frozen Soil in Shield-Driven Tunnelling

Study of Analytical Solution on Starting Shaft Disaster in Shield Launching

Model Test Study on the Influence of Ground Surcharges on the Deformation of Shield Tunnels