Abstract:<p>Production casing deformation has hindered the safe and economic development of shale gas resources, especially in Weiyuan-Changning Shale Gas field, China. In terms of current literatures, this problem should be attributed to the casing failure induced by varying high loads during the multi-fracturing process. However, the characteristics of casing deformation under cycling loads have hardly been investigated in previous work. In order to realize the casing deformation mechanism during multi-fracturing, the casing deformation real-time monitoring system is improved, based on full-scale casing-cement sheath-formation system (CCFS) combination device. Further, the deformation testing experiments of P110 casing under cycling inner pressure loads, for four conditions (1#-standard condition, 2#-higher inner pressure, 3#-thinner casing, 4#-thicker cement sheath), are carried out … Besides, the reliability of experiment approach is verified, by the consistency of effective circumference strain values in the loading process of first cycle between calculated by elastic theory and determined in this paper. Further, the casing strength under cycling loads is analyzed, to evaluate the casing failure in shale gas well. Results illustrate that the casing under cycling loads are available to generate residual strain, which are reliable to reach 0.035%, 0.104%, 0.042% and 0.027%, respectively, based on above mentioned four testing parameters under 16 cycles. The higher cycling inner pressure significantly increases the residual strain of casing, which is harmful for the casing protection. Increasing the thickness of casing and cement sheath is beneficial to reduce the residual strain of casing. The casing collapsing strength is linearly lowered with cycling number, due to the growing unrecovered strain of casing during multi-fracturing. It precisely explains the phenomenon that casing deformation frequently occurs in the last few fracturing stages of shale gas wells. The casing strength lines from experiment results demonstrate higher accuracy than API (American Petroleum Institute) standard, in evaluating the casing failure of field cases. This work will provide a new criterion for the parameters designs of casing and fracturing in shale gas wells, to reduce the risk of casing deformation during multi-fracturing.</p>

Effect of drilling parameters on casing wear rate in ultra-deep directional well drilling

A Numerical Simulation of the Effect of Drilling Fluid Rheology on Cutting Migration in Horizontal Wells at Different Drilling Fluid Temperatures

The visualization of rub-impact characteristics of drill string on casing

Effect of Impact Force on the Impact-Sliding Wear of Titanium Alloy Drill Pipes against Steel Casings

Safety and reliability evaluation of casing in ultra-deep well based on uncertainty analysis of extrusion load

Feasibility Verification of Casing Drilling in Shallow Marine Formations

Investigation of casing deformation characteristics under cycling loads and the effect on casing strength based on full-scale equipment

Analysis of Bottomhole Rock Stress in Deep-Well Drilling Considering Thermal-Hydro-Mechanical Coupling

Probing the Effect of Cuttings Particle Size on the Friction and Wear Mechanism at the Casing Friction Interface: A Molecular Dynamics Study

Failure analysis of wellhead casing and optimization of slip hanger in ultra deep wells

Investigation on the cuttings carrying capacity of a novel retractable drill bit used in casing while drilling with air reverse circulation

Investigation on axial-lateral-torsion nonlinear coupling vibration model and stick-slip characteristics of drilling string in ultra-HPHT curved wells

Numerical Investigations on the Effect of a Cuttings Bed Remover on the Cuttings Carrying Capacity in Horizontal Drilling

Evaluation of rock-bit interaction test under simulated ultra-deep well conditions based on similarity principle

Numerical Analysis of Casing Damage in Heavy Oil Thermal Recovery Wells

Improving drilling speed and borehole quality in ultra-deep complex formations through rock mechanics research

Orthogonal wear experiment of 13Cr-L80 tubing string in high-yield gas wells and analysis of its influencing factors

Numerical Characterization of the Annular Flow Behavior and Pressure Loss in Deepwater Drilling Riser

Research on the influence of strike-slip fault slippage on production casing and control methods and engineering application during multistage fracturing in deep shale gas wells

Experimental study on the sliding friction of cuttings bed and pipe during horizontal-well drilling considering pipe rotation

Quantitative Study on the Anticollapse Ability of Casing in Shale Gas Wells under Complex Load Conditions