Solvent deasphalting process of Oman vacuum residue to produce bright stock and 30# hard asphalt

Yujun Tong,Benxian Shen,Jichang Liu,Hengwen Huang,Zhengtian Yao

DOI: https://doi.org/10.3969/j.issn.1000-8144.2017.11.007

2017-01-01

Abstract:The solvent composition and operating conditions of propane solvent deasphalting of Oman vacuum residue were optimized,and the mixture performance of blended 30# asphalt was investigated;meanwhile,the catalytic cracking performance of heavy deasphalted oil was studied in fixed bed catalytic cracking unit. The result showed that the optimal conditions were as follows:mixture solvent of 80％(w) propane and 20％(w)iso-butane,extraction tower top temperature of 68℃, settling tower top temperature of 81℃,volume ratio of solvent to vacuum residue of 5.0,extraction pressure of 4.35 MPa;Under this condition,the yield of light deasphalted oil was 25.1％ and the properties of light deasphalted oilconformed to the requirement of bright stock;the yield of de-oil asphalt was 46.0％ and the softening point of de-oil asphalt was 61.7℃;meanwhile,de-oil asphalt could be used to produce 30# asphalt by blending with Saudi Arab Middle vacuum residue,and the blended 30# asphalt mixture had high rut dynamic stability and water resistant stability. Heavy deasphalted oil could be used as feedstock of catalytic cracking and light yield oil (gasoline and diesel) was 61.70％.