Leaching mechanisms of ions from mold flux and its effect on water quality

HUANG Ting,WEN Guang-hua,BAI Bin-wen,TANG Ping,GAO Jin-xing

DOI: https://doi.org/10.13228/j.boyuan.issn1001-0963.20160121

2017-01-01

Abstract:A large number of ions dissolve into the water from mold flux during the molten slag contacting with the secondary cooling water at the mold exit,leading to the water quality changed.So the acidic water accelerates the corrosion of continuous casting equipment,and significantly increasing F-content in the water also leads to water pollution.The fluorine-free,low fluorine and high fluorine mold flux were researched by the leach tests of molten slag for investigation of effects of mold flux on water quality.The results show that the pH of leaching water of fluorine-free mold flux varies from 7 to 10;the F-ions concentration of leaching water of low fluorine mold flux is about 5-7 mg/L and the pH ranges from 7 to 10;but the F-ions concentration of leaching water of high fluorine mold flux is up to 35 mg/L,the pH ranges from 4 to 10.Dissolving of cations from mold flux by ion exchange makes the water alkaline,while dissolving of F-ions by ion exchange makes the water acidic.So pH of the water is decided by the two kinds of ion exchange process.The dissolution of F-ion is inhibited in the fluorine-free and low fluorine mold flux,so the water pollution and the formation of corrosive acidic water caused by fluorine are inhibited.