Abstract:In this manuscript, we consider the accuracy of end-point carbon content prediction affected by oxygen injection in multiple stages of electric arc furnace (EAF) melting process. Such a prediction would help to further evaluate process control strategies and optimize overall operation of the electric arc furnace. Principal component analysis (PCA) was used to normalize the 13 input variables affecting the endpoint carbon content. log-sigmoid and tan-sigmoid functions were used to verify the same sample, and it was found that the Mean squared error(MSE) of the model under logsig + logsig function was smaller, indicating that the model was more stable. At the same time, different hidden layer nodes were tried, and finally the structure of the model was determined as 13 × 10 × 8 × 1, and the activation function was logsig + logsig. Using historical smelting data to train and test the neural network model, the correlation coefficient (R) of the verified model is 0.7632, the model prediction is in the range of ±0.03%, the hit rate of the model is 64.5%, and the hit rate of the model is 42% in the range of ±0.02%. Combining the verification basis of the model with the metallurgical reaction principle of the EAF steelmaking process, a pretreatment method of phased input of total oxygen is proposed. The oxygen is divided into three stages, which are the oxygen consumption volume of 0–5 min, 5–30 min and more than 30 min and other variables are kept unchanged. The same neural network is used to train and verify the same data. After verification, the R of the oxygen staged model is 0.8274. The model prediction is in the range of ±0.03%, the hit rate of the model is 78.5%, and the hit rate of the model is 58% in the range of ±0.02%. Finally, an on-line carbon content prediction system based on artificial neural network model is developed and applied to actual production. Running results illustrated that the hit rate of end-point carbon content is 96.67%, 93.33% and 86.67%, respectively when the prediction errors are within ±0.05%, ±0.03% and ±0.01%, the improved neural network model can effectively predict the end-point carbon content, which provides a good basis for the carbon content at the end point of EAF steelmaking process.

End-point Prediction Model Based on Artificial Neural Network for Ferrous Metallurgy

Research on hot metal Si-content prediction based on LSTM-RNN

Application of improved EMD-Elman neural network to predict silicon content in hot metal

A Sliding-Window T-S Fuzzy Neural Network Model For Prediction Of Silicon Content In Hot Metal

A Context-Aware Enhanced GRU Network with Feature-Temporal Attention for Prediction of Silicon Content in Hot Metal

Artificial Neural Network Model for Temperature Prediction and Regulation during Molten Steel Transportation Process

Predicting endpoint parameters of electric arc furnace–based steelmaking using artificial neural network

Prediction Model of End-point Manganese Content for BOF Steelmaking Process

Influence Factor Analysis and Prediction Model of End-Point Carbon Content Based on Artificial Neural Network in Electric Arc Furnace Steelmaking Process

The strength prediction model of iron ore sinter based on an artificial neural network

A Predictive Modeling for Blast Furnace by Integrating Neural Network with Partial Least Squares Regression

Application of artificial neural networks for prediction of sinter quality based on process parameters control

Intelligent predictive modeling of blast furnace system

Artificial Neural Network: Some Applications in Physical Metallurgy of Steels

A novel hybrid intelligent model for molten iron temperature forecasting based on machine learning

Intelligent Prediction of E4303 Electrode Mechanical Properties Based on Fuzzy Neural Network

Endpoint Prediction Model of Basic Oxygen Furnace Steelmaking Based on PSO-ICA and RBF Neural Network

Prediction Of Hot Metal Silicon Content In Blast Furnace Based On Emd And Dnn

Intelligent Prediction Model of Matte Grade in Copper Flash Smelting Process

Metallurgical Processes Modeling and Parameter Optimization Based on Artificial Neural Network

Prediction of Ladle Furnace Refining Endpoint Temperature Based on Particle Swarm Optimization Algorithm and Long Short-Term Memory Neural Network