Abstract:By employing carefully controlled processing methods, a large amount of porosity (>70vol%) was introduced in ceramic materials derived from preceramic polymers (silicone resins) after pyrolysis at 1000–1200°C in inert atmosphere. The resulting components have a bulk density ranging from ∼250 to 950kg/m3. Three main fabrication methods have here been employed: (1) direct foaming of a solution of a thermosetting silicone resin in a suitable solvent (with or without the addition of polyurethane precursors), acting also as a blowing agent; (2) the use of sacrificial fillers that decompose during pyrolysis, consisting in polymeric microbeads; (3) the mixing of preceramic polymers possessing different characteristics, in particular ceramic yield, depending on their molecular structure. In addition to that, several methods for developing micro- or meso-pores within the resulting SiOC macro-porous ceramics were explored, with the aim of fabricating components with hierarchical porosity. These include a controlled thermal treatment, the addition of fillers with a high specific surface area (SSA), the deposition of zeolites or meso-porous silica coatings, the infiltration with aerogels, selective etching of the SiOC material and the in situ formation of C-based nanostructures. Depending on the fabrication procedure adopted, cells with an average size ranging from the micrometer to the millimeter were obtained. All these processes are simple, economical and versatile, and large bodies with various shapes (tubes, plates, blocks) can be produced, possessing a wide range of morphologies and properties. Compression strength, flexural strength and Young's modulus vary with the morphology and density of the porous components. It is also possible to add to the preceramic polymers some filler powders, for instance possessing electrical conductivity or magnetic properties, leading to the production of functional cellular ceramics.

Research Progress on the Preparation of Porous Polymer Derived Ceramics

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Application Research on Si-Based Polymer Derived Ceramics

Recent advances on polymer precursors derived silicon-based ceramics:Fabrication, functionalization and high temperature application

Recent Advances in Preceramic Polysilazane Precursors in Additive Manufacturing

The Fate and Role of in Situ Formed Carbon in Polymer-Derived Ceramics

Research Progress in Preparation of Porous Ceramics

Recent advances in precursor-derived ceramics integrated with two-dimensional materials

Enhancing organosilicon polymer-derived ceramic properties

Preparation and Properties of Porous PDCPD-Based Materials

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Preparation and Mechanical Properties of ZrO2-reinforced Polymer-Derived SiCNO Composite Ceramics

Recent Progress in Preparation and Application of Porous Ceramics

Processing Methods for the Preparation of Porous Ceramics

The Preparation, Applications and Research Development of the Porous Ceramics

Polymer-Derived Ceramics Technology: Characteristics, Procedure, Product Structures, and Properties, and Development of the Technology in High-Entropy Ceramics

Fabrication of Porous Ceramics by Direct Foaming

4D printing of shape-programmable polymer-derived ceramics via two-stage folding-assisted pyrolysis strategy

Engineering porosity in polymer-derived ceramics

A Review of Absorption Properties in Silicon-Based Polymer Derived Ceramics

Development of Porous SiC Ceramics Preparation Technology