Abstract:The carbon element distributions along casting direction at centerline position, V-shaped segregation band, and columnar to equiaxed transformation (CET) position in continuous-casting billet have been first obtained by the original position statistic distribution analysis (OPA). Different location points at a certain position were formed along the opposite direction of casting direction with the lapse of the time, so the carbon mass fractions of different location points at a certain position can be considered as a time series. Based on the actual result, some typical time-series analysis technologies, such as the autoregressive integrated moving average (ARIMA) model, were used to analyze the characteristics of the three time series. It is found that there is some periodicity in the carbon element distribution at centerline position, and the correlation relationship between centerline position and CET position is closer than that between the centerline position and V-shaped segregation band at the same location point along the casting direction. Moreover, the element distribution along the casting direction is one of the solidifying results with the lapse of the time, so it is possible to investigate the characteristics of the system about the solidification process of continuous-casting billet by using these time series. Then it shows that there is a chaos feature in the system about the solidification process of studied continuous-casting billet on the basis of Hurst exponents and saturated correlative dimensions. Meanwhile, the formation process of carbon element distribution along casting direction can be described as fractional Brownian motion, and the upper and lower limits of the number of internal independent variables were determined in order to describe the formation process of carbon element distributions at different positions of the studied billet. Finally, the stochastic extent at V-shaped segregation band is found to be the largest, and it needs more independent variables to describe its formation process than the other two positions.

An Probability Density Function Based Investigation on the Graphite Grain Distribution

Study on Application of Probabilistic Method in ASME Standard on Fine-grained Graphite

Investigation of Material Properties Based on 3D Graphite Morphology for Compacted Graphite Iron

An Uncertainty Evaluation on the ΔKth and ΔKIC of Fine-grained Isotropic Graphite

Fuzzy Neural Network Analysis on the Compacted Graphite Iron with Improved Tensile and Heat Transport Properties

A study investigating the cutting mechanism of compacted graphite iron based on a novel microstructure of finite element model

The relationship of structure and processing condition of isotopic graphite

A statistical analysis of pores and micro-cracks in nuclear graphite

Study on Strength Distribution and Failure Probability for IG 110

Static and Dynamic Fracture Toughness of Graphite Materials with Varying Grain Sizes

Tomographical Study Of The Effect Of Graphite On Properties Of Cast Iron

The Evaluation of Graphitization Degree P1 Model and Measurement of C/C Composites

An Experimental Investigation on the Settling Velocity and Drag Coefficient of Micrometer-Sized Natural, IG-110, NG-CT-10 and A3-3 Graphite Particles

Challenges and possibilities of the manual metallographic serial sectioning process using the example of a quantitative microstructural analysis of graphite in cast iron

Comparative Study on Probabilistic and Deterministic Methods for Stress Assessment of Reflector Graphite Bricks in HTR

Nanoscale Quantitative Characterization of Microstructure Evolution of Partly Graphitized High Rank Coal: Evidence from AFM and HRTEM

An Order Statistic Approach for Inference of the Size Distribution of 3D Particle Clusters in Metal Matrix Nanocomposites

Multiscale Characterization and Comparison of Historical and Modern Nuclear Graphite Grades

A novel method for estimating subresolution porosity from CT images and its application to homogeneity evaluation of porous media

A statistical analysis of pores and microcracks in nuclear graphite

Time-Series Analysis Technologies Applied to the Study of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet