Abstract:Liquid-infused surfaces have recently gained prominence in engineering applications owing to their versatile characteristics such as self-cleaning, anti-fogging, drag reduction, and enhanced heat transfer. In this article, a numerical analysis of pressure-driven flow past a periodic array of rectangular transverse grooves infused with non-Newtonian immiscible lubricants is performed. The volume of fluid method is employed to capture the interface between primary and secondary fluids, and the power-law model is deployed to mimic the non-Newtonian lubricant. The drag reduction capability of the microchannel is examined for various parameters such as Reynolds number, liquid fraction, viscosity ratio, viscosity index, and contact angle. It is observed that the introduction of a non-Newtonian fluid (shear-thickening or shear-thinning) drastically modifies the interface velocity and hydrodynamic resistance. In particular, a shear-thinning lubricant enhances the slip length as the viscosity index (n) is reduced owing to the reduced viscosity at the interface. Note that, for a lubricant having n = 0.7, the percentage improvement in the slip length is 382% in comparison with a Newtonian counterpart having the same viscosity ratio, N = 0.1. Importantly, the introduction of a shear-thinning lubricant with a viscosity ratio N = 5, a liquid fraction of 0.8, and a behavior index n = 0.7 yielded a pressure drag reduction of 63.6% with respect to a classical no-slip channel and of 23% with reference to a microchannel with the Newtonian lubricant. Moreover, at high Reynolds numbers, Re→50, the drag mitigation is slightly lowered due to the primary vortex shift in the cavity. Furthermore, the effect of the interface contact angle (θc) is investigated, as θc drops from 90° (flat) to 45° (convex); the meniscus curvature is enhanced, and the effective slip length is reduced. These observations suggest that a shear-thinning lubricant-infused microchannel is a promising candidate for drag reduction in lab-on-chip applications.

Effects of Surface Wettability on Interfacial Drag Reduction in Micro-channel

Laminar Drag Reduction in Hydrophobic Microchannels

Drag Reduction in Ultrahydrophobic Channels with Micro-Nano Structured Surfaces

Hydrophobicity Induced Drag Reduction: Perspectives from the Slip Length

SIMULATION OF THE LIQUID COUETTE FLOW IN A NANO-CHANNEL WITH DIFFERENT WETTABILITY

Investigating the Flow Characteristics of Superhydrophobic U-Shaped Microchannels

Surface Wettability Regulation on the Miniaturized V-shaped Channels Fabricated by Hot-Embossing

Effects of the inner surface properties of microchannel on the fluid flow characteristics therein

Co-effect of Hydrophobicity and Cavities on Flow Characteristics at Microscale

Maintenance of Air Layer and Drag Reduction on Superhydrophobic Surface

DRAG REDUCTION IN TURBULENT FLOWS OVER SUPERHYDROPHOBIC SURFACES WITH MICRO-NANO TEXTURES

Pressure and partial wetting effects on superhydrophobic friction reduction in microchannel flow

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure

Heat Transfer Enhancement and Drag Reduction in Transverse Groove-Bounded Microchannels with Offset

Experimental research on drag reduction of flow in micro channels of rocks using nano-particle adsorption method

"Fluid Bearing" Effect of Enclosed Liquids in Grooves on Drag Reduction in Microchannels

Hydrodynamic drag reduction in ribbed microchannel with infused non-Newtonian lubricants

Molecular Dynamics Study on Drag Reduction Mechanism of Nonwetting Surfaces

Wettability State Transition and Interfacial Slip Analysis of the Hydrophobic Nanostructure Surface Controlled by an Electric Field

Lattice Boltzmann Simulation of Slip Flow and Drag Reduction Characteristics of Hydrophobic Surfaces