Abstract:Frequency-swept interferometry (FSI) is a powerful ranging method with high precision and immunity to ambient light. However, the stand-off distance of the current FSI-based ranging system for noncooperative targets is relatively short because the weak echo power cannot provide the needed signal-to-noise ratio (SNR). Here, we report a ranging method that combines FSI and the laser feedback technique. Compared with conventional FSI, the interference between the weak echo signal and the local oscillator occurs in the laser cavity, which enhances the signal spontaneously and then provides an improved SNR. In the experiments, the detection limit of the echo power is less than 0.1 fW, with a 1 mW probe beam. Based on the enhancement from the laser feedback technique, the system can detect a noncooperative target that is up to hundreds of meters away in space without extra optical amplifiers. On the other hand, a large stand-off distance makes the system sensitive to environmental disturbance, which degrades the ranging precision. To address this issue, an interferometry-based compensation device, which is also sensitive to weak echoes from noncooperative targets, is proposed to monitor the optical-path-length drifts and ensure accurate beat frequency recognition. Moreover, the device can record distance changes during the integration time of ranging and track a moving target precisely with improved temporal resolution. Owing to the high sensitivity and the validity of the compensation approach, the standard deviation in 10 measurements is better than 0.07 mm when targeting an aluminum sheet at approximately 152 m. Generally, with a large range, high relative precision, and low photon consumption, the novel technical scheme for laser ranging demonstrates new capabilities that promise to enable a wide range of applications, such as large equipment assembly and noncooperative-target tracking.

One-way Frequency Modulation Continuous Wave Ranging System Research

Design of an Autonomous and Controllable Laser Ranging System

Design of Variable Frequency Dual Transponder System for Fixed Point Ranging

Simulation of Dual Transponder Carrier Ranging Measurements

Design and Derivation of the Dual Transponder Carrier Ranging System

Design and Implementation of High-Precision Ranging Validation System

Design and fabrication of a high-precision 360 laser receiver for leveling applications

Dual Transponder Ranging Performance in the Presence of Oscillator Phase Noise

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Research On Thermal Error Compensation Instrument Based On Thermal Modal Analysis For Nc Machine Tools

Accuracy Improvement in Range Measurements of Short-Range FSK Radars

Research and Application on Optic-electronic Ranging Technology for Close Quarters

Frequency-swept Feedback Interferometry for Noncooperative-Target Ranging with a Stand-off Distance of Several Hundred Meters

Precise ultrasonic ranging method based on self-adaptive wavelet de-noising

Precision and Stability of a Space Laser Ranging Technology Based on Time-Frequency Co-Transfer

Dispersion Compensation and Modes Separation of Ultrasonic Guided Waves in Long Cortical Bone

Laser Feedback FMCW Ranging System Based on Multiple-Equal-Phase-Subdivision Resampling

Design of a LiDAR ranging system based on dual‐frequency phase modulation