Application of GPS and Serial Communication for Dredging Boat

XU Guo-hua,WANG Qing-feng

DOI: https://doi.org/10.3969/j.issn.1001-3881.2005.10.059

2005-01-01

Abstract:Positioning and displaying the dredging boat with multithread serial communication technology receiving signal from GPS on industrial computer can simply the operation of dredging boat positioning and improve the construction efficiency.

What problem does this paper attempt to address?

The Integrated Navigation System of Auv "Xuanwu"

Guihui Chen,Jun Han,Jianyong Wu,Yixing Ying

DOI: https://doi.org/10.1109/oceansap.2016.7485601

2016-01-01

Abstract:This system is an underwater integrated navigation system based on Attitude Heading Reference System (AHRS)/Global Positioning System (GPS)/Doppler Velocity Log (DVL). It is built on STM32F103 equipped with the uCOS-II system, which has perfect real-time character, low cost and high-performance. The present hardware includes singer board computer, AHRS, DVL, depth gauge, and GPS receiver. Kalman filter is applied in the sensors data process and dead-reckoning algorithm of navigation system. This paper describes hardware and software design as well as results of simulation. The performance analysis is carried out based on the position and velocity errors. It shows that the system is viable and can be used in the "XUANWU" Autonomous Underwater Vehicle (AUV).
Study on the Application of GPS in the Track Detecting Instrument

陈海大,张海军,朱虎,何闻,贾叔仕

DOI: https://doi.org/10.3321/j.issn:1001-8360.2004.02.023

2004-01-01

Abstract:The portable track detecting instrument facilitates effective inspection of track smoothness. The speed measuring module is an important component of the system. The present way of measuring speeds has serious defects, such as that the positioning mistake is too large. To solve this problem, a new type track-detecting instrument using the Global Positioning System is studied. The paper discusses the hardware and software designs of the new system,and the key technologies of using the GPS, and also experimental analysis. The new system improves the accuracy of failure-point positioning. It helps to find the failure points more quickly and accurately, thus increasing the efficiency of maintenance.
Development of an AUV “Xuanwu-1” with Docking Function

Yixing Ying,Jun Han,Guihui Chen,Jianyong Wu

DOI: https://doi.org/10.1109/oceansap.2016.7485728

2016-01-01

Abstract:Ocean has always intrigued mankind. Presently, ocean inspection, monitoring and exploitation has been achieved with the development of ocean technology. The seafloor observatory network, a mature and all-weather fixed observatory platform, makes it possible to monitor ocean environment in long term and in real time, while its range of observation is limited by cable. A compact Autonomous Underwater Vehicle (AUV) namely "Xuanwu-1" was designed for mobile observatory, which can charge and transfer data by non-contract power supply and data transfer system via docking station, setting up at the Zhejiang University seafloor observatory node. The combination of the two improves the underwater continuous operation time and data transmission efficiency of a typical AUV. This paper uncovers and introduces solutions for the design and implementation of "Xuanwu-1" under limited conditions. One major effort is the overall design of this AUV, including mechanical design and control system design. Through the use of mathematical modeling and simulation, "Xuanwu-1" realized several typical motions under ideal conditions. The implementation of this AUV is time-consuming and finally it was tested under lab conditions. As the first generation of "Xuanwu" series, this open-frame compact AUV is used for oceanographic surveys from close to the surface of the sea. In the near future, this AUV can dock with the integrated docking system and to be the complement of cabled seafloor observatory network. With time, the AUV design will have to change in order to optimize its performance as the engineering technology progress.
Sea Experiment of Positioning Underwater Mobile Vehicles Using Multiple Surface Beacons

Huifang Chen,Luyixin Zhang,Feng Liu,Chuanlei Lv,Lei Xie,Shengjun Xiong,Haijun Wang,Shaoqiong Yang,Wen Xu

DOI: https://doi.org/10.1109/ieeeconf38699.2020.9389088

2020-01-01

Abstract:In the paper, we present the sea experiment of positioning underwater vehicles using multiple surface beacons. A system is designed to realize the underwater vehicles' positioning using the time difference of arrivals (TDOA) technique, where no strict clock synchronization between beacons and underwater vehicles is required. Moreover, an Extended Kalman Filter (EKF) method is introduced to improve the robustness. A sea experiment is conducted to verify the proposed positioning method. In the experiment, three surface beacons broadcast positioning messages synchronously at a given interval. The underwater node uses the received positioning messages and its corresponding arrival time to perform the position calculation. The experimental results show that the proposed positioning method works well and the average positioning error is less than 20 meters.
A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

Xinlong Chen,Shuo Liu,Tao Wang,Jingyang Li,Tian Xia

DOI: https://doi.org/10.1109/oceans51537.2024.10682180

2024-01-01

Abstract:Due to limited battery and storage space, the Autonomous Underwater Vehicles (AUVs) need to complete docking with the subsea docking station (SDS) for charging and data transmission. To ensure successful docking, accurate terminal positioning is crucial. We propose a novel multi-stage visual positioning method that segments terminal navigation into two distinct stages, focusing on different targets: active lights and passive markers. Additionally, we incorporate a neural network to augment the algorithm's robustness, thereby enabling AUVs to achieve whole-process high-precision positioning. The efficacy of our positioning approach has been substantiated through in-air testing, and the viability of our medium-range positioning algorithm has been demonstrated through underwater trials. The forthcoming phase involves integrating this algorithm into the AUV's system to execute actual docking task.
GPS and Its Application in the Channel Management

Yingjun Li,LI Tian-yan

2008-01-01

Abstract:The GPS-induing-time position function is used synchronously to achieve on and off of pharoses which are a safeguard to indicate ship running in the inland river waterway safely.It is of great value to fix remote measurement and remote control apparatus in the inland river,this can great reduce the costs to be used in maintaining navigation-mark-boats.The cost of maintenance of the inland river waterway is reduced by the installation of GPS beacon to ships,and this is very high practical value.
GPS-based Mobile Water Supply Control System

冯东,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2010.10.006

2010-01-01

Abstract:For the frozen winter in the north,the water tank in the ports is prone to get iced which makes water supply impossible.In order to solve these problems of the coal ports in the north,the mobile water supply control system based on GPS is built with PLC,GPS,wireless module,water level sensor and so on.The fixed tank is replaced by mobile tank which is real-time located with GPS.The system is applied in the coal ports of Qinhuangdao.The cost and difficulty of the tank heating is reduced and the expected results is obtained.
Serial Communication Between Computer and GPS Receiver

MA Ling-ling,YANG Jia-xiang,DAI Li-li,JIANG Di,HAN Bo

DOI: https://doi.org/10.3969/j.issn.1673-629X.2011.03.057

2011-01-01

Abstract:Real-time monitoring of highway pavement,especially roughness of the high-speed railway is to ensure that the safety degree of prerequisite,in order to achieve this condition,vehicle's dynamic measurement is one of preferred technologies.In this technique,the fault location of road is the key technology.Through analyzing GPS data transfer mode and NMEA-0183 agreement,the serial communication is implemented by using the communication control MSComm in VB 6.0.After the commissioning of the program,MSComm control can realize real-time information displays on the monitor such as time,height,latitude and longitude of runing vehicles,achieve real-time monitoring of the fault.The technology not only provides technical support for the pavement roughness dynamic test,but also provides a reference for the technology.
A Network Protocol Based on Satellite Communication and Its Application on Vessel Monitoring

Zheng Chaobo,Chu Jianxin,Shen Aidi,Tang Anhui,Qiao Xinmin

DOI: https://doi.org/10.3969/j.issn.1627-9730.2006.05.024

2006-01-01

Abstract:The paper proposes a network communication protocol based on GPS and BEIDOU/WorldSpace satellite,describing the way on realtime dynamic riverboat monitoring when using it.This method has powerful capability of communication and wide coverage,and has the ability to receive data quickly and precisely.At last the paper provided an applied instance.By using this way we achieve good economic and social effct.
Integration of Beidou and Gps in Vessel Monitoring System

Ming Liu,Huan Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amm.373-375.1622

2013-01-01

Applied Mechanics and Materials

Abstract:A novel method has been proposed for integrated Beidou and GPS (Global Positioning System) navigation system in vessel monitoring system. Application of integrated Beidou and GPS navigation system's high precision positioning and SMS (Short Messaging Service) communication technology in vessel can well solve the problem of vessel navigation, positioning, remote monitoring and commanding. Based on 27 stations of Crustal Moment Observation Network of China, satellite visibility and availability of integrated Beidou and GPS are calculated and analyzed in detail. A data compression algorithm is proposed for Beidou SMS communication technology to get the continuous location and other state of the target vessel. Experimental results reveal that the integrated Beidou and GPS system is superior to any single system in all respects of positioning performance.
Design and Experiment of Remote Communication System Base on GPS/GPRS Technology

Jiaping Lin,Linhua Cen

DOI: https://doi.org/10.34257/gjsfrivol20is1pg23

2020-02-27

Global Journal of Science Frontier Research

Abstract:This article mainly describes Remote communication system Base on GPS/GPRS technology in construction machinery, and focus on introducing the technology of data transportation between machine ECU with GPS terminal and remote control machine via RS232 serial communication circuit. In this way it provides monitoring machine online and prevents GPS terminal from removed in Construction machinery. Currently many machinery suppliers have adopted finance lease to push selling in domestic market, In order to secure selling from financial risk and guarantee monitoring machine running information, GPS/GPRS technology integrated in Construction machinery becomes one of the essential marketing measures.
Application of GPS Measurement Technology and Computer Technology in Visual Construction Simulation of Construction Engineering

Xiaowen Hu

DOI: https://doi.org/10.1155/2022/8374901

2022-08-12

Mobile Information Systems

Abstract:The traditional construction engineering survey has many construction problems, but also may produce large error, leading to the measurement results that cannot meet the actual requirements of the project. In this paper, a new measurement technology is proposed from the aspects of determining the angle and distance of GPS laser scanning, stitching and registration of surveying and mapping data, and GPS measurement of building engineering structures. The test results show that the measurement coincidence rate decreases with the increase of construction time. We can also obviously find the changes of visibility of different frequency points in middle and high frequency bands. The visibility of middle and high frequency band is less sensitive to construction than that of low frequency band. This method has high accuracy and can provide high accuracy for future construction and data storage. Throughout the current situation of the whole construction industry, people need to find a scientific, feasible, and efficient way to solve the problem of low efficiency and serious waste of resources. With the development of GPS measurement technology and computer technology, information technology has been deeply into various industries, such as manufacturing industry, aerospace industry, etc., through electronic information means to optimize the production technology and process, so that the production efficiency and quality have been significantly improved. Similarly, we can apply GPS measurement and computer technology to the construction industry, achieve scientific construction project management, standardize engineering technology standards, and finally achieve the ideal effect.

computer science, information systems,telecommunications
Navigation and positioning system design of an AUV underwater docking

Yue Zhijie,Wang Ting,Zhijie Yue,Ting Wang

DOI: https://doi.org/10.1109/coa.2016.7535735

2016-01-01

Abstract:AUV underwater docking is an effective way to provide energy supplement and complete information exchange with an AUV, which in turn allows an AUV make long-term missions in the water and avoid the need for repeated launching and retrieval. This paper proposes a new navigation and positioning system, which measures distance by underwater acoustic communication and by USBL. It can be used for underwater AUV remote positioning and guiding, so that an AUV can find the underwater feeder station in order to complete energy supply and exchange of information. The system consists of a T/R transducer at the end of the AUV; an electronic cabin within the chamber of the AUV, and, a T/R transducer USBL array and watertight electronic cabin at the end of underwater feeder station. For the hardware, the T/R transducers operating band is 10 kHz ~ 14kHz with overflow structure; there is a USBL array of conical structures; and, an electronic compartment which uses DSP, FPGA, M5P430 joint architecture. For the algorithms, the underwater acoustic communication equipment uses both LFM signal head and DSSS communication algorithms in order to obtain distance measurement results. The USBL array uses M sequence modulated signals emitted from the AUV terminal in order to measure direction. The system performance was tested in a lake, In the static case, the range accuracy was $\mathbf{0.2m\ \boldsymbol{\pm}\ 0.05\%,}$, and the orientation of the measurement accuracy is 0.3° In the dynamic case, the positioning results were compared with GPS Real-time results, and their positioning track fitted well with each other.
Baiyangdian wetland unmanned ship self positioning and monitoring system

Dan Sheng,Xiaojun Zhao,Hongbei Zhang,Chenkang Wang,Rui Li

DOI: https://doi.org/10.3969/j.issn.1674-7720.2015.17.019

2015-01-01

Abstract:Aiming at problems of difficult to maintain static monitoring node of Baiyangdian wetland, a method that using unmanned ship as dynamic monitoring node is proposed. The program used GPS technology and GPRS technology to achieve unmanned ship positioning and monitoring, and mainly consisted of ship unit and control center. The ship unit collected and transfered the unmanned ship position information, and received commands to control the movement of the ship. The control center was a PC software using C# language in Visual Studio 2010 development platform, and displayed unmanned ship position informationon on the electronic map, and transfered the control commands. Experiments showed that the system has advantages, such as stable and reliable operation, easy control, and simple maintenance.
Design and Implementation of Unmanned Surface Vehicle for Water Quality Monitoring

ZhongWei Guo,Yucheng Gu,Huiru Cao,Jiaxin Zhou

DOI: https://doi.org/10.1109/IAEAC.2018.8577260

2018-10-01

Abstract:River pollution is becoming more and more serious with the development of industry in developing countries. So, water-quality monitoring has become an urgent problem to be solved. Although there have been a lot of valuable studies in recent years, there exists the drawbacks such as lack of intelligence, automotive or flexible and more monitoring system needing to manipulate the related devices. Therefore, a water-quality monitoring wireless Unmanned Surface Vehicle (USV) is designed to aim at these deficiencies. Meanwhile, based on 4G communication module, communication USV sub-system is designed to adapt to long-distance transmission with TCP and HTTP communication protocols. On the aspect of control, the smart ship is using data interface and TTL interface to realize data transmission between sensors and controls. The automatic cruise algorithms are provides considering GPS positioning and 9-axis sensor. Finally, through the real experiments, USV can automotive move according with presetting path and gathering the sensing data.

Environmental Science,Engineering,Computer Science
Construction and Application of Virtual Experiment Teaching System for Integrated Mapping of Unmanned Ship

Yuanrong He,Ruping Sun,Yuli Wang,Dewei Nie,Weisen Wang

DOI: https://doi.org/10.1088/1755-1315/784/1/012007

2021-05-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract At present, China’s water pollution situation is still very serious, and water pollution prevention is an important part of ecological environment protection, and water quality monitoring and pollution traceability are the basis of prevention and control work. Unmanned ship system uses GNSS intelligent navigation and positioning technology, automatic obstacle avoidance technology, real-time communication technology, sonar sounding technology and manual control technology, etc., by collecting underwater terrain, water quality information and underground pipe detection, it can complete water quality detection unmanned, intelligent and efficient. In this paper, the system architecture and measurement principle of unmanned equipment are comprehensively expounded, and based on WebGL and virtual simulation technology, an open unmanned equipment virtual simulation training system is constructed, which can directly carry out assembly training of unmanned aircraft and unmanned ship and flight control training of unmanned aircraft on the Web side. Finally, the feasibility and development prospect of unmanned equipment in sewage monitoring are discussed with an application example.
Traffic Data Collection System for Floating Car Based on GPS/GPRS/MM

Jun Bi,Lu Wang,Yue Liu

DOI: https://doi.org/10.1109/GCIS.2010.68

2010-01-01

Abstract:The traffic data collection system for floating car is composed of two important parts that are the car equipment and the monitoring system in the center. The hardware of car equipment is composed of ARM board, GPS module, GPRS communication module, memory card, power, USB interface, display interface, audio interface and so on. In the software system of car equipment, the methods for receiving GPS data and connecting GPRS network are discussed. In order to improve the monitoring precision in the center, the map-matching algorithm based on the D-S evidence reasoning theory is used to correct the error of GPS data. The practical applications show that the system design methods are valid.
Application of GPS in the Measuring of Foundation Position Control Net of Five Mines Subordinated to Handan Mining Bureau

Wang Yanqing

DOI: https://doi.org/10.14018/j.cnki.cn13-1085/n.2012.10.006

2012-01-01

Abstract:The article demonstrates the application of GPS in engineering,taking the measuring of foundation position control net of five mines subordinated to Handan Mining Bureau as an example,presents the technology design,outdoor observation,and data processing method of GPS control net for engineering survey,and the problem that should note.
Programming to Achieve the Reception Extraction and Translation of GPS Positioning Information

mingqin shao,xuelin yang

DOI: https://doi.org/10.1109/CSMA.2015.52

2015-01-01

Abstract:There is a large amount of information within every group of the received GPS positioning information, Users only need to extract and translate the useful information for them, this can be achieved by computer programs. The GPS information extraction follows the NMEA0183 standard, this paper writes a simple MFC dialog-based program based on the serial communications and GPS communication protocols. The program can be used to extract and translate GPS positioning information, store the positioning information and calculate the differential correction and then present the positioning results to users. This paper describes the function of each part and implementation methods of the program.
Time synchronization and data transfer method for towed electromagnetic receiver

Yong Qiu,Qin Yang,Ming Deng,Kai Chen

DOI: https://doi.org/10.1063/5.0012218

2020-09-01

Abstract:Deep marine controlled-source electromagnetic (CSEM) prospecting has attracted extensive interest because it enables high efficiency and high horizontal-resolution prospecting of gas hydrate and oil. However, the elimination of time errors between the transmitter and the receiver and realization of long-distance high-speed real-time data transmission (submarine towed body status information and raw electromagnetic field data stream) are worthwhile challenges that require continuous effort. We developed a novel towed CSEM system using double-vessels that have high time synchronization accuracy and real-time data transmission. The near-seafloor-towed CSEM receiver contains a deck user terminal, master node, slave nodes, tail buoy, and neutrally buoyant towed cable. The deck user terminal generated and transmitted a pulse per second to the master node through a fiber converter and optical fiber. The RS-485 transceiver then turned the pulse signal into a differential signal and transmitted it to each slave node for error-free synchronization. The time information was also transmitted from the deck user terminal to various nodes through ethernet switches, optical fibers, and serial to ethernet converters. The deck user terminal can conveniently communicate with each node cascaded by the ethernet switch through ethernet and fiber optic communication technology. During an offshore experiment involving oil and gas exploration in the South China Sea, the towed CSEM receiver continuously acquired all electromagnetic components and status information, which achieved a preliminary prospecting result. The maximum transfer rate of real-time data can reach 10 Mbps with 300 m distance between each slave node, and the time synchronization error between transmitter and receiver is less than ±3 µs.

Application of GPS and Serial Communication for Dredging Boat

The Integrated Navigation System of Auv "Xuanwu"

Study on the Application of GPS in the Track Detecting Instrument

Development of an AUV “Xuanwu-1” with Docking Function

Sea Experiment of Positioning Underwater Mobile Vehicles Using Multiple Surface Beacons

A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

GPS and Its Application in the Channel Management

GPS-based Mobile Water Supply Control System

Serial Communication Between Computer and GPS Receiver

A Network Protocol Based on Satellite Communication and Its Application on Vessel Monitoring

Integration of Beidou and Gps in Vessel Monitoring System

Design and Experiment of Remote Communication System Base on GPS/GPRS Technology

Application of GPS Measurement Technology and Computer Technology in Visual Construction Simulation of Construction Engineering

Navigation and positioning system design of an AUV underwater docking

Baiyangdian wetland unmanned ship self positioning and monitoring system

Design and Implementation of Unmanned Surface Vehicle for Water Quality Monitoring

Construction and Application of Virtual Experiment Teaching System for Integrated Mapping of Unmanned Ship

Traffic Data Collection System for Floating Car Based on GPS/GPRS/MM

Application of GPS in the Measuring of Foundation Position Control Net of Five Mines Subordinated to Handan Mining Bureau

Programming to Achieve the Reception Extraction and Translation of GPS Positioning Information

Time synchronization and data transfer method for towed electromagnetic receiver