Abstract:Gas turbine plays an important role in energy and aviation, among which the turbine blades are the key components. Ni base superalloys are the preferred material to manufacture blades due to their high temperature strength, microstructural stability and corrosion resistance. As a conventional directional solidification method, high-rate solidification (HRS) is used to produce columnar grain and single crystal blades. However, there are several problems when FIRS is scaled to cast industrial gas turbines (KIT) components. In recent years, several possible techniques are being proposed for large IGT blades. The liquid-metal cooling (LMC) is one of the best methods among them, which improves heat extraction by immersing the casting and the mold into a container of metal cool-ant with low melting temperature as they are withdrawn from the heating zone. Unfortunately, the trial and error method is time and money cost and lead to a long R&D cycle. Therefore, numerical simulation plays an important role to optimize the process, and enhance the productivity in LMC directional solidification. In this work, mathematical models for dynamic heat radiation and convection boundary of LMC process are established to simulate the temperature fields. Cellular automaton (CA) method and KGT growth model are used to describe the nucleation and growth. The pouring experiments are carried out. The accuracy of the model is validated by the cooling curves and microstructure. Moreover, the liquid-metal cooling directional solidification process is discussed in more detail, including primary dendrite arm space (PDAS), secondary dendrite arm space (SDAS), mushy zone and microstructure, etc.. Simulation and experiment results are compared in the work. This study indicates that simulation and experimental results agree with each other well. The maximum error of temperature is less than 5 percent and the morphologies of grains are similar. The withdrawal rate has an important influence on the shape of mushy zone and dendritic structure. A concave mushy zone is formed and the grain tends to convergent under an excessive withdrawal rate. However, the mushy zone has a convex shape and the grain is divergent under a smaller withdrawal rate. A proper withdrawal rate is found to obtain smooth mushy zone, improve the parallelism of grains, and refine the dendritic structure.

Experimental Study of the Casting Technological Factors on the Surface Microstructure of Grains of Turbine Blade Castings in Ni Based Superalloy

Effect of centrifugal casting process on mold filling and grain structure of K418B turbine guide

Progress on Modeling and Simulation of Directional Solidification of Superalloy Turbine Blade Casting

Effect of Process Parameters on Microstructure and Properties of Superalloy Turbine Guide Castings by a Novel Electromagnetic Oscillation Method

The Study of Titanium Alloy Precision Casting Turbine Blades Based On Procast

Modeling of Unidirectional Growth in a Single Crystal Turbine Blade Casting

Numerical simulation of meso micro structure in Ni based superalloy during liquid metal cooling process

Numerical Simulation of Grain Selection Behavior of Single Crystal Ni3al Based Superalloy Casting

Three-Dimensional Microstructure Simulation of Ni-Based Superalloy Investment Castings

Development of Numerical Simulation in Nickel-Based Superalloy Turbine Blade Directional Solidification

Numerical Simulation of Mechanical Properties of Nickel Base Casting Superalloy with the Mesoscale Finite Element Method

MODELING AND SIMULATION OF DIRECTIONAL SOLIDIFICATION BY LMC PROCESS FOR NICKEL BASE SUPERALLOY CASTING

Numerical Simulation of Unidirectional Solidification Process of Turbine Blade Castings

Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy Investment Castings

Modeling of directional solidification process of superalloy turbine blade castings

Multi-scale Modeling of Solidification Process of Ni-based Superalloy Investment Castings

Optimization of investment casting process for K477 superalloy aero-engine turbine nozzle by simulation and experiment

Effects of Foundry Variables and Refiners on Cast Structures of Superalloy K4169i. Grain Structures and Grain Refinement Mechanisms

Microstructures and homogenization behavior of a nickel-based superalloy used for 850¬Ý‚ÑÉ turbine disc prepared by electron beam smelting layered solidification

Simulation Analysis Techniques for Investment Casting Process of Ni-Base Superalloy Components

Modeling of Mircrostructure Evolution in Directional Solidification of Ni-Based Superalloy Turbine Blade