Abstract:The research presents an effective approach to achieve the selective separation of rare earth elements (REEs) from waste Nd-Fe-B magnets. Investigations show that the use of a two-stage roasting process can significantly reduce the amount of ammonium sulfate required and improve the separation efficiencies of REEs. During the first low-temperature roasting stage, almost 80% of REEs can be transformed into RE2(SO4)3 or NH4RE(SO4)2 at 400 °C within 1 h, whilst simultaneously iron and other impurities are converted into insoluble metal ammonium sulfates. These intermediate products can then be subjected to a further roasting procedure at 750 °C for 2 h, leading to an extraction of REEs of up to 96%. In contrast, the extraction of the related impurities: Fe, Al, Cu and Co is only 0.008%, 0.27%, 1.64% and 3.48%, respectively. Through the analysis and characterization of the calcine and leach residue, it was found that the decomposition of NH4RE(SO4)2 and the reaction of Fe2(SO4)3 and RE2O3 together improve the extraction of REEs during the second roasting stage. After separation of REEs, the main phase present in the leach residue is hematite, which can be recycled as a feedstock material for iron or steelmaking processes. Moreover, waste gases from this process – like NH3, SO2, and SO3 - can also be recovered and reused in the preparation of (NH4)2SO4, which significantly reduces the costs of the recycling operations. Overall, this newly developed process has considerable environmental and economic advantages for the recovery of valuable metals from waste Nd-Fe-B magnets.

A new method about the separation and recovery of iron and rare metals from RE-Nb-Fe rough concentrate with low grade

Enrichment of Rare Earth and Niobium from a REE-Nb-Fe Associated Ore via Reductive Roasting Followed by Magnetic Separation

Separation and recovery of valuable metals from low-grade REE–Nb–Fe ore

Study on Separation of Niobium and Iron from Low Grade Niobium Ore

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

The Study on Microwave Magnetic Roasting Plus Magnetic Seperation and Acid Pickling to Enrich Nb of Low-Grade Niobium Minerals

Separation and Recovery of Rare Earths and Iron from NdFeB Magnet Scraps

Separation of niobium and rare earths from Fe-Nb-RE associated ultra-low-grade tailings using super gravity

Selective separation of rare earths from spent Nd-Fe-B magnets using two-stage ammonium sulfate roasting followed by water leaching

Experimental Investigation on Direct Reduction Followed by Magnetic Separation for Nb2O5-Bearing Ore

Improved iron recovery from low-grade iron ore by efficient suspension magnetization roasting and magnetic separation

Selective extraction and separation of REEs from NdFeB magnets scrap using co-chlorination and water leaching

Extraction of Niobium from the Bayan Obo Tailings by “Flotation—Microwave Magnetic Roasting—Magnetic Separation”

Carbothermal reduction followed by sulfuric acid leaching of Bayan Obo tailings for selective concentration of iron and rare earth metals

An Innovative Technology for Full Component Recovery of Iron and Manganese from Low Grade Iron-Bearing Manganese Ore

A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

Recovery and separation of rare earths and boron from spent Nd-Fe-B magnets

Properties of flash roasted products from low-grade refractory iron tailings and improvement method for their magnetic separation index

Fundamental Research on Selective Pre-enrichment of Low-Grade Niobium Concentrate from Bayan Obo Mine Via Super Gravity