Abstract:Laboratory testing of phasor measurement units (PMUs) guarantees their performance under laboratory conditions. However, many factors may cause PMU measurement problems in actual power systems, resulting in the malfunction of PMU-based applications. Therefore, field PMUs need to be tested and calibrated to ensure their performance and data quality. In this paper (Part I), a general framework for the field PMU test and calibration in different scenarios is proposed. This framework consists of a PMU calibrator and an analysis center, where the PMU calibrator provides the reference values for PMU error analysis. Two steps are implemented to ensure the calibrator accuracy for complex field signals: $\textcircled{1}$ by analyzing the frequency-domain probability distribution of random noise, a Fourier-transform-based signal denoising method is proposed to improve the anti-interference capability of the PMU calibrator; and $\textcircled{2}$ a general synchrophasor estimation method based on complex bandpass filters is presented for accurate synchrophasor estimations in multiple scenarios. Simulation and experimental test results demonstrate that the PMU calibrator has a higher accuracy than that of other calibrator algorithms and is suitable for field PMU test. The analysis center for evaluating the performance of field PMUs and the applications of the proposed field PMU test system are provided in detail in Part II of the next-step research.

A new vector measurement method for power system based on all-phase Fourier transform

The Power Angle and Phase Measurement Units Based Wide Area Measurement System and Its Application

Study on state estimation with PMU equipped at partial nodes of power systems

REAL-TIME MONITORING SYSTEM FOR THE STATES OF POWER NETWORK OVER ETHERNET AND ATM

The Framework and Algorithm of A New Phasor Measurement Unit

State estimation for distribution systems using micro-synchrophasors

A Novel Phasor Measurement Unit with Free Scaled Synchronized Time-mark

A New Synchronized Phasor Measurement Unit on Electric Power System

Optimal PMU Placement Approach for Power Systems Considering Non-Gaussian Measurement Noise Statistics

An Electrical Parameter Measurement System Based on DSP and LabVIEW

A Dynamic Phasor Estimation Algorithm Based on Angle-Shifted Energy Operator

A new method of real time and synchronous measurement on power network phase parameters

Research on Perception of Power System State Based on Wams

Field PMU Test and Calibration Method– Part I: General Framework and Algorithms for PMU Calibrator

PMU Angle Deviation Detection and Correction Using Line Reactive Power Measurements

An Agent-Based Distributed State Estimation Approach for Interconnected Power Systems

Dynamic Synchronized Phasor Measurement Based on AM-FM Demodulation

Transmission Lines Positive Sequence Parameters Estimation and Instrument Transformers Calibration Based on PMU Measurement Error Model

Power System Monitoring Through Low-Voltage Distribution Network Using freePMU

Micro Pmu Based Monitoring System For Active Distribution Networks

Method for Accurately Measuring the Power-Frequency Parameters of Ehv/Uhv Transmission Lines