Abstract:Seawater desalination has emerged as an important source of fresh water. Low-temperature multi-effect distillation (LT-MED) is one of main methods of seawater desalination. LT-MED desalination system consists of a few types, such as forward feed configuration, backward feed configuration, parallel feed configuration and mixed feed configuration. Among them, the mixed feed configuration can process higher concentration ratio of seawater than that of the others and the spray density of this configuration can be easily designed to achieve a reasonable range which are important for operation. In this study, a mathematical model of mixed feed LT-MED desalination system with thermal vapor compressor (TVC) has been established based on the mass and energy conservation. In this model, the temperature losses are calculated in terms of boiling point elevation (BPE) of sea water and steam flow pressure drop during tube bundle, demisters and pipelines. To develop this model, the property parameters of seawater are considered as the functions of temperature and concentration, and the property parameters of fresh water and saturated steam are considered as the functions of temperature. The model simulation is based on the system with a rated water production of 3500 t d(-1). Taking actual operation into account, some related factors on the system performance have also been analyzed such as entrained steam position of TVC, heating steam temperature of the first effect, motive steam parameters of TVC, and position of preheater. The results show that when the entrained steam position of TVC is located at the effect just behind the mixed feed position, the gained output ratio (GOR) reaches the maximum value and the total area of evaporators reaches the minimum value, which will benefit to reduce the water cost. It is also observed that the impact of motive steam parameters of TVC on GOR is greater than on total area of evaporators. The increase of motive steam parameters and a design with the preheater before the entrained steam position of TVC will greatly contribute on reducing the cost of water.

Study on the Performance of Twin-screw Expander-compressor Used for Seawater Desalination

Performance simulation and analysis of steam ejector

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Performance Analysis of Parallel Feed Lt-Med Desalination System with Thermal Vapor Compressor

Modeling study of mechanical vapor compressor and its coupling with wind power generator

Numerical simulation of single-effect thermal vapor-compression desalination system

Simulation and Analysis of A Single-Effect Thermal Vapor-Compression Desalination System at Variable Operation Conditions

Development of a Water-Injected Twin-Screw Compressor for Mechanical Vapor Compression Desalination Systems

Modelling and Experiments on Ocean Thermal Energy for Desalination

Study of steam parameters on the performance of a TVC-MED desalination plant

Theoretical Study of Two-Stage Water Vapor Compression Systems

Modeling and Performance Study of a Water-Injected Twin-Screw Water Vapor Compressor

Performance Simulation and Analysis of Steam Ejector under Different Operating Condition

Performance Study of Water-Injection Scroll Air Compressor

Energy, Exergy and Economic Analysis of a Hybrid Spray-Assisted Low-Temperature Desalination/thermal Vapor Compression System

Thermodynamic Simulation On The Performance Of Twin Screw Expander Applied In Geothermal Power Generation

Performance Analysis of Mixed Feed LT-MED Desalination System with Thermal Vapor Compressor

Study on Thermodynamic Process of Two-Phase Screw Expander

Mathematical modeling and performance analysis for multi-effect evaporation/multi-effect evaporation with thermal vapor compression desalination system

Performance of MVR Desalination System with Variable Operating Conditions for Wastewater Treatment

Analysis of a Hybrid Thermal Vapor Compression and Reverse Osmosis Desalination System at Variable Design Conditions