Abstract:Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation (RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Accurate Control of a Robot Hydraulic Actuator with Uncertain Friction

Backstepping Robust Adaptive Control for an Electro-Hydraulic Servo System

Nonlinear Robust Adaptive Control of Electro-hydraulic System

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-Based Friction Compensation

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Improved adaptive robust control of servo system with harmonic drive

Robust H∞ Control of a Friction Based Electrohydraulic Load Simulator

Output Feedback Adaptive Robust Control of Hydraulic Actuator with Friction and Model Uncertainty Compensation.

Robust Control of Uncertain Robotic Systems: an Adaptive Friction Compensation Approach

Robust Adaptive Tracking Control of Hydraulic Actuators with Unmodeled Dynamics

Robust H-Infinity Control Of A Friction Based Electrohydraulic Load Simulator

Adaptive Robust Control for Hydraulic Actuators with Disturbance Estimation

Robust H(∞) Positional Control of 2-DOF Robotic Arm Driven by Electro-Hydraulic Servo System.

Robust Control for Position Servo System of Asymmetric Hydraulic Cylinder

High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties

Adaptive Integral Robust Control of Hydraulic Systems with Asymptotic Tracking

Adaptive Robust Precision Motion Control of Single-Rod Hydraulic Actuators with Time-Varying Unknown Inertia: A Case Study

Modeling and Robust Discrete-Time Sliding-Mode Control Design for a Fluid Power Electrohydraulic Actuator (EHA) System

Adaptive Control of Hydraulic Actuators with LuGre Model Based Friction Compensation

Robust H-Infinity Tracking Control for a Valve-Controlled Hydraulic Motor System with Uncertain Parameters in the Complex Load Environment

Adaptive Robust Motion Control Of Electro-Hydraulic Servo Systems Driven By Single-Rod Actuators