Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Pressure Control Characteristics of Main Transmission System of Hydraulic Transmission Wind Energy Conversion System

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Hybrid Power Transmission Technology in a Wind Turbine Generation System

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement

Controls of Hydraulic Wind Turbine

STUDY ON OPERATION MECHANISM OF A NEW TYPE ELECTRO-HYDRAULIC GENERATOR APPLIED IN WIND POWER GENERATION SYSTEM

Dynamics of Hydraulic Transformer Controlled Motor System

A Novel Hydraulic Transmission Solution to Large Offshore Wind Turbine: Design and Control Strategy

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Variable Motor of Main Transmission System in Wind Turbine Grid Connected Control in Fixed Displacement Pump-Parallel

Output Power Control for Hydro-Viscous Transmission Based Continuously Variable Speed Wind Turbine

Design of Hydraulic Transmission Systems for Tidal Current Turbines and Its Simulation Validation

Bivariate Active Power Control of Energy Storage Hydraulic Wind Turbine

MODELING AND SIMULATION OF WIND-WAVE ENERGY HYBRID POWER SYSTEM BASED ON HYDRAULIC TRANSMISSION

Research on the Key Problems of MPPT Strategy Based on the Active Power Control of Hydraulic Wind Turbine

Velocity Control of Hydraulic Motor in Hydraulic Wind Turbines

Compensation Control of Constant Speed Output in Hydraulic Wind Turbine

APPLICATION AND SIMULATION OF POWER SPLIT IN HYBRID TRANSMISSION WIND TURBINES

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines