Abstract:In this paper, a novel magnetorheological (MR) damper working in the squeeze-valve bi-mode of MR fluid (MRF) was developed. The damper was consisted of two parts: the valve part and the squeeze part. Both of the two working parts could provide damping force when the damper worked. Firstly, the model of the novel damper was established to ensure that the damper structure was suitable for our design. Then, the magnetic field distribution inside the MR damper was simulated. The simulated results showed that the magnetic flux density was 120 mT when the current in the coil was 2.0 A, and the magnetic field distribution was uniform at the working area of the MRF. The magnetic flux density inside the damper could be controlled by changing the current in the coil. Finally, the damper was fabricated and its mechanical properties were tested by the universal testing machine (MTS 809). The influences of the displacement, frequency, current, and velocity on the damping force were systematically analyzed. The test results indicated that the largest damping force provided by the MR damper was about 6.5 kN. The curves of the damping force versus displacement were plump, which indicated that the ability of the damper to expend energy was well. The effective damping increased from 31.5 to 620 kNs m(-1) when the current increased from 0 to 2 A. The results indicated the properties of the damper could change in a huge range. To analyze the semi-active control performance of the damper, the back propagation neural network was trained to predict the damping force. The predicted results matched well with the experimental results, which indicated that this novel MR damper had great potential in the semi-active control field.

Issues in Design Rules of a Magnetorheological Fluid Shock Absorber for Automobile

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Dynamics of A Rotor Supported on Magnet-Rheological Fluid Squeeze Film Damper

Magnetorheological Fluid Dampers and Their Properties

Study on Damping Properties of Magnetorheological Damper

Experimental Studties Mangnetic Circuit of Three Stage Piston-type Magnetorheological Fluid Damper

A Disc-Type Magneto-Rheologtic Fluid Damper

Experimental Investigation on the Dynamic Behavior of A Disk-Type Damper Based on Magnetorheological Grease

A Magneto-Rheological Fluid Squeeze Film Damper For Rotor Vibration Control

Magnetic circuit design for magneto-rheological damper

Design of Magnetorheological Damper Control System for Vehicle Suspension

Performance analysis of the damper with built-in magnetorheological valve

Magnetic and Mechanical Performance of Magnetorheological Fluid Damper with Different Dimension

Multi-objective Optimization Design of a Magnetorheological (MR) Fluid Damper Using a Genetic Algorithm

Mechanical Properties of Magneto-Sensitive Shear Thickening Fluid Absorber and Application Potential in a Vehicle

Magnetic Circuit Design and Mechanical Performance Study for a MR Damper

Design, theoretical modeling, and experimental analysis of a magnetorheological damper with radial damping gap

Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF