Abstract:Robot arms with lighter weight can reduce unnecessary energy consumption which is desirable in robotic industry. However, lightweight arms undergo undesirable elastic deformation. In this paper, the planar motion of a lightweight flexible arm is investigated. In order to obtain a precise mathematical model, the axial displacement and nonlinear curvature of flexible arm arising from large bending deformation is taken into consideration. An in-extensional condition, the axial displacement is related to transverse displacement of the flexible beam, is applied. This leads to a robotic model with three rigid modes and one elastic mode. The elastic mode depends on time and position. An Assume Mode Method is used to remove the spatial dependence. The governing equations is derived using Lagrange Method. The effects of nonlinear terms due to the large deformation, gravity, and tip-mass are considered. Control inputs include forces and moment exerted at the joint between slider and arm (see Fig. 1). The conventional computed torque control laws cannot stabilize the system, since there are not as many control inputs as states of the system. A Particle Swarm Optimization (PSO) technique is then used to obtain a suitable trajectory with the aim of minimizing excitations of the elastic mode. Two methods are considered for generating a trajectory function, either to use a three-layer Artificial Neural Network (ANN) or to use spline interpolation. A sliding mode control strategy is proposed in which the sliding surfaces include elastic mode in order to guarantee robustness. The simulations show that the three-layer ANN technique provides arbitrary small settling time, and also the optimization algorithm converges faster and generates smooth trajectories unlike spline function technique.

Optimal Trajectory Planning With Three-parameter Lamé Curve for Delta Robot

A New Method Of Discrete Trajectory Planning For Robot Manipulators

Discrete trajectory planning for robotic arms

Autonomous Trajectory Planning Based on Bézier Curve with Curvature Constraints and Piecewise-Jerk Speed-Time Optimization

Trajectory Optimization for 3D Shape-Changing Robots with Differential Mobile Base.

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

A Optimized NURBS Curve Trajectory Planning Algorithm Based on Genetic Algorithm

A novel cartesian trajectory planning method by using triple NURBS curves for industrial robots

A Geometric Method for Kinematics of Delta Robot and Its Path Tracking Control

Optimal Trajectory Planning for Flexible Robots with Large Deformation

Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators

An Improved Geodesic Algorithm For Trajectory Planning Of Multi-Joint Robots

Trajectory Planning for a Welding Robot Based on the Bezier Curve

Trajectory Optimization and Force Control with Modified Dynamic Movement Primitives under Curved Surface Constraints.

Smooth and Time-Optimal Trajectory Planning for Robots Using Improved Carnivorous Plant Algorithm

An Asymmetric Collision-Free Optimal Trajectory Planning Method for Three DOF Industrial Robotic Arms

Real-time jerk-minimization trajectory planning of robotic arm based on polynomial curve optimization

A Multi-Objective Trajectory Planning Method for Collaborative Robot

Smooth and Time-Optimal S-curve Trajectory Planning for Automated Robots and Machines

Multi-objective optimal trajectory planning for robot manipulator attention to end-effector path limitation

Trajectory Planning of Robot End-Effector Position and Orientation Based on Cubic Spline