Abstract:Abstract The fast swimming speed, flexible cornering, and high propulsion efficiency of diving beetles are primarily achieved by their two powerful hind legs. Unlike other aquatic organisms, such as turtle, jellyfish, fish and frog et al., the diving beetle could complete retreating motion without turning around, and the turning radius is small for this kind of propulsion mode. However, most bionic vehicles have not contained these advantages, the study about this propulsion method is useful for the design of bionic robots. In this paper, the swimming videos of the diving beetle, including forwarding, turning and retreating, were captured by two synchronized high-speed cameras, and were analyzed via SIMI Motion. The analysis results revealed that the swimming speed initially increased quickly to a maximum at 60% of the power stroke, and then decreased. During the power stroke, the diving beetle stretched its tibias and tarsi, the bristles on both sides of which were shaped like paddles, to maximize the cross-sectional areas against the water to achieve the maximum thrust. During the recovery stroke, the diving beetle rotated its tarsi and folded the bristles to minimize the cross-sectional areas to reduce the drag force. For one turning motion (turn right about 90 degrees), it takes only one motion cycle for the diving beetle to complete it. During the retreating motion, the average acceleration was close to 9.8 m/s 2 in the first 25 ms. Finally, based on the diving beetle's hind-leg movement pattern, a kinematic model was constructed, and according to this model and the motion data of the joint angles, the motion trajectories of the hind legs were obtained by using MATLAB. Since the advantages of this propulsion method, it may become a new bionic propulsion method, and the motion data and kinematic model of the hind legs will be helpful in the design of bionic underwater unmanned vehicles.

Design of a New Propulsion Mechanism of Imitation Turtle's Flapping-Wing

Design and Modeling of a Novel Biomimetic Robot Inspired by Water Strider

Mechanism Design and Kinematics Analysis of a Bio-Inspired Flexible Flapping Wing

Design and Implementation of Multi-Level Linkage Mechanism Bionic Pectoral Fin for Manta Ray Robot

Kinematic Modelling and Hydrodynamic Analysis of Biomimetic Pectoral Fins of Cownose Ray

The Mechanism of Flapping Propulsion of an Underwater Glider

An Experimental Study of the Effects of Asymmetric Pitching Motion on the Hydrodynamic Propulsion of a Flapping Fin

Mechanism Design and Motion Control of Robotic Dolphin

Overview of Progress in Development of the Bionic Underwater Propulsion System

Development of A Flipper Propelled Turtle-Like Underwater Robot and Its Cpg-Based Control Algorithm

Design and motion analysis of a space crank rocker biomimetic aircraft

Design and Mechanical Analysis of Bionic Foldable Beetle Wings

Effect of Frequency-Amplitude Parameter and Aspect Ratio on Propulsion Performance of Underwater Flapping-Foil

Kinematics Analysis and Gait Study of Bionic Turtle Crawling Mechanism

Mechanism Design and Kinematics Analysis of a Bat Robot

Design of bionic active folding flapping wing vehicle

Research and Implementation of Pneumatic Amphibious Soft Bionic Robot

TCR-Driven Transendothelial Migration of Human Effector Memory CD4 T Cells Involves Vav, Rac, and Myosin IIA

Observation and analysis of diving beetle movements while swimming

Mechanical design and motion control of a biomimetic robotic dolphin

Construction and Central Pattern Generator-Based Control of a Flipper-Actuated Turtle-Like Underwater Robot