Abstract:The theory for designing the profile line of twin-screw compressor was applied to study the double cycloid-arc symmetry profile lines of three different tooth numbers which are applied to twin-screw oil and gas multiphase pump as well as their geometric characteristics.The geometric characteristic values of relevant profile lines were calculated through a comprehensive analysis of the meshing property of screw rotor.It was pointed out that the sealability of inter-tooth volume is the important criterion for evaluating the quality of rotor lines.The geometric characteristic parameters which can have an important effect on the sealability of profile line include contact line,leakage triangle,inter-tooth volume,and so on.The research findings show that with the increase of tooth numbers the area of leakage triangle tends to decrease but in a very small degree.When the tooth height coefficient increases,the area of leakage triangle decreases and the contact line increases remarkably.The decrease speed of leakage triangle area of multi-tooth profile is obviously better than that of single-tooth profile.When the diameter of addendum circle increases,the rotor sealability decreases fast,even though the area improves through the use of coefficient.This tendency becomes more remarkable with the increase of tooth numbers.Different leakage channels make different contributions to leakage,and leakage triangle constitutes the main leakage part of such profile lines.

A Design Method of Engaging Couple Profile of Single Screw Compressors Enveloped by Multi Straight Lines

A New Design of the Tooth Profile for Single Screw Compressors

Principle of Multi-Column Envelope Couple of Single Screw Compressor

A Synergy-Column Envelope Meshing Pair Profile for Single Screw Compressors

Research on Theoretical Tooth Shape of the Star- Wheel in a Single Screw Compressor

Study on Rotor Profile Design of Screw Compressors

Study on Rotor Profile Design of Screw Compressors Based Upon Meshing Line Method

An optimization of the star-wheel profile in a single screw compressor

Design of the Curved Flank for the Star-Wheel Tooth in Single Screw Compressors

A Comparative Analysis of Different Tooth Number Profile Lines of Twin-screw Multiphase Pump

Study on Rotor Profile Design of Screw Compressors Based Upon Rack Generation Method

Study on Tool Profile Design of Screw Compressor Rotors

Study on the Screw Rotor Profile of Non-Leakage Dry Screw Vacuum Pump

Geometric Design Investigation Of Single Screw Compressor Rotor Grooves Produced By Cylindrical Milling

Analysis of Circumferential Force on Star-wheel in Single Screw Compressors

A Multicolumn Envelope Meshing Pair for Single Screw Compressors

Research of Wear-out-failure of Star-wheel Teeth in Single Screw Compressors

Study on Meshing Pair of Circular-Circular Envelope Curve in the Profile Design of Screw Rotors

Solving the conjugate tooth profile of screw compressor rotors using edge detection method based on Alpha Shape algorithm

Geometrical Design and Investigation of a New Profile of the Three Screw Pump

Simulation of the Surface Profile of the Groove Bottom Enveloped by Milling Cutters in Single Screw Compressors