Abstract:Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel (CV) and extinguished burning surface characterization relying on interrupted closed vessel (ICV) and scanning electron microscope (SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size, respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of <em>u</em>-<em>p</em> curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.

Properties of High Density Spherical RDX-based Cast Explosives

Shock Response of 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX): the C-N Bond Scission Studied by Molecular Dynamics Simulations

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

A new insight into the mechanical behavior of high-quality RDX in pressed polymer bonded explosives

Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

[New strategies in the treatment of chronic viral hepatitis].

Research of detonation products of RDX/Al from the perspective of composition

Ultrafine RDX / Al Preparation and Properties of Mixed Explosives

Theoretical Insight into Different Energetic Groups on the Performance of Energetic Materials Featuring RDX Ring

Insensitive energetic microspheres DAAF/RDX fabricated by facile molecular self-assembly

Effects of particle size and content of RDX on burning stability of RDX-based propellants

Hybrid RDX crystals assembled under constraint of 2D materials with largely reduced sensitivity and improved energy density

Preparation and Safety of Well-Dispersed RDX Particles Coated with Cured HTPB

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Thermal Decomposition and Kinetics of Cast Plastic Bonded Explosives Based on NTO and HMX

The effect of Mg(BH4)2 on the energy characteristics of RDX based aluminized explosives

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Mechanochemical fabrication and properties of CL-20/RDX nano co/mixed crystals

ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Thermal stability evaluation of black powder, RDX, PETN and TNT

Exposed Facets and Surface Properties of Highly Explosive RDX Studied by the Crystal-Face-Indexing Method and Theoretical Calculations